2n3904 Audio Amp

A Transistor Audio Amp - KE3IJ

http://ke3ij.com/amp.htm

The class AB power amp section is made up of the 2N3904/2N3906 (Q4/Q5) output pair, along with the 2N3904 (Q3) driver that precedes them. This section humps a little current to drive the 8 ohm speaker, but doesn't have much voltage gain; that's why you need at least ONE of the two preamps left in-circuit.

Very simple amplifier circuit using transistor 2N3904

https://www.eleccircuit.com/very-simple-preamplifiers-using-2n3904/

Basic transistors amplifier circuit using 2N3904 This is a basic transistor amplifier circuit. It is suitable to learn how the transistor works. We can divide the operating range of the transistor into 3 ranges. CUT-OFF is that the transistor will stop working, in this period there will be no base current (IB) and collector current (IC).

Using 2n3904 transistors built-in audio amplifier | AVR Freaks

https://www.avrfreaks.net/forum/using-2n3904-transistors-built-audio-amplifier

Bipolar transistors such as the 2N3904 are excellent at detecting radio signals. Usually it will be a radio station that is close to you so that the strength of the signal is quite high. That is the usual reason why you don't hear many stations at the same time. The biggest factor that determines whether a circuit will do this is HOW it is built.

Class A single transistor amplifier with 2N3904 ...

https://electronics.stackexchange.com/questions/174223/class-a-single-transistor-amplifier-with-2n3904

The maximum rating for the 2N3904 is 625mW, so no surprise that the transistor gets hot fast. If you drop a TIP41C into the circuit you should still be able to measure a signal at the amplifier output, but it will probably a lot lower because the current gain of the TIP41C is a magnitude lower compared to the 2N3904.

8 Simple 2N3904 Circuits for Beginners

https://www.apogeeweb.net/circuitry/simple-2n3904-circuits.html

none

Small Audio Power Amplifier Using Op-Amp and Two ...

https://www.deeptronic.com/electronic-circuit-design/small-audio-power-amplifier-using-op-amp-and-two-transistors/

Using two small transistors (2N3904 and 2N3906), we can build small power amplifier which deliver several hundreds milliwats. The basic circuit is a totem pole transistor pair with small biasing circuit configuration to give small leakage idle-current. Let’s see the schematic diagram of the circuit in the Figure 2.

Microphone Preamplifier Circuit Using 2N3904 Transistor

https://circuits-diy.com/microphone-preamplifier-circuit-using-2n3904-transistor/

Simple Audio Pre-Amplifier - Schematic Design

https://circuitdiagram.net/simple-audio-pre-amplifier.html

This is a simple audio pre-amplifier circuit using single transistor 2N3904. This easy circuit provides good gain to weak audio signals such as electret microphone. Use it in front of an RF oscillator to make an RF transmitter that’s very sensitive to sound.

Single Transistor Audio Amp - Hackster.io

https://www.hackster.io/jwzumwalt/single-transistor-audio-amp-32033a

Audiohanoi - Showroom âm thanh Hi-end, Hi-fi, Karaoke ...

https://audiohanoi.com/

Công ty TNHH Thương mại và dịch vụ Audio Hà Nội Trụ sở chính: Số 22 Hàng Chuối - Hai Bà Trưng - TP.Hà Nội Điện thoại: Mr Thu : 0985 .54 77 88 …