We have collected the most relevant information on 2w Audio Amp. Open the URLs, which are collected below, and you will find all the info you are interested in.
2W Audio Amplifiers | Newark
https://www.newark.com/c/semiconductors-ics/amplifiers-comparators/audio-amplifiers?output-power=2w#:~:text=Audio%20Amplifiers%20%20%20%20Manufacturer%20Part%20No,been%20restr%20...%20%203%20more%20rows%20
2W Audio Amplifiers | Newark
https://www.newark.com/c/semiconductors-ics/amplifiers-comparators/audio-amplifiers?output-power=2w
Mono, 2W, Switch-Mode (Class D) Audio Power Amplifier
https://www.maximintegrated.com/en/products/analog/audio/MAX4295.html
Description. The MAX4295 mono, switch-mode (Class D) audio power amplifier operates from a single +2.7V to +5.5V supply. The MAX4295 has > 85% efficiency and is capable of delivering 2W continuous power to a 4Ω load, making it ideal for portable multimedia and general-purpose high-power audio applications. The MAX4295 features a total harmonic distortion plus noise …
LM4835 Stereo 2W Audio Power Amplifiers with DC Volume ...
https://www.ti.com/lit/ds/symlink/lm4835.pdf
LM4835 Stereo 2W Audio Power Amplifiers with DC Volume Control and Selectable Gain Check for Samples: LM4835 1FEATURES DESCRIPTION The LM4835 is a monolithic integrated circuit that 23• PC98 Compliant provides DC volume control, and stereo bridged • DC Volume Control Interface audio power amplifiers capable of producing 2W into
2w Audio Power Amplifiers | Products & Suppliers ...
https://www.globalspec.com/industrial-directory/2w_audio_power_amplifiers
Description: The D 2 -24044 device is a high performance, integrated Class-D amplifier power stage. The four power stage outputs are configurable as four separate Half-Bridge outputs, as two Full-Bridge outputs, or combinations of Half-Bridge and Full-Bridge. Individual power. Device Type: Audio Amplifiers.
2 Watt Mini Audio Amplifier - Schematic Design
https://circuitdiagram.net/2-watt-mini-audio-amplifier.html
2 Watt Mini Audio Amplifier Technical Data: Output power: 1.5 Watt RMS @ 8 Ohm, 2.5 Watt @ 4 Ohm, 3.5 Watt @ 2 Ohm (1KHz sinewave) Sensitivity: 100mV input for 1.5W output @ 8 Ohm; Frequency response: 30Hz to 20KHz -1dB; Total harmonic distortion @ 1KHz & 10KHz: Below 0.2% @ 8 Ohm 1W, below 0.3% @ 4 Ohm 2W, below 0.5% @ 2 Ohm 2W.
MAX98300 Mono 2W Class D Amplifier | Maxim Integrated
https://www.maximintegrated.com/en/products/analog/audio/MAX98300.html
Description/Applications. The MAX98300 mono 2.6W Class D amplifier provides Class AB audio performance with Class D efficiency. This device offers five selectable gain settings (0dB, 3dB, 6dB, 9dB, and 12dB) set by a single gain-select input (GAIN). Active emissions-limiting edge-rate and overshoot control circuitry greatly reduces EMI.
LM380 2W Audio Power Amplifier - Datasheet
https://circuits-diy.com/lm380-2w-audio-power-amplifier-datasheet/
LM380 2W Audio Power Amplifier – Datasheet. The LM380 is a power audio amplifier for consumer applications. In order to hold system cost to a minimum, the gain is internally fixed at 34 dB. A unique input stage allows inputs to be ground referenced. The output is automatically self-centering to one-half the supply voltage.
LM4838 data sheet, product information and support | TI.com
https://www.ti.com/product/LM4838
The LM4838 is a monolithic integrated circuit that provides DC volume control, and stereo bridged audio power amplifiers capable of producing 2W into 4Ω with less than 1.0% THD or 2.2W into 3Ω with less than 1.0% THD (see Notes below).
Dual 2.2W Audio Amplifier Plus Stereo Headphone Function
http://www.hmsemi.com/downfile/HM4863.PDF
Dual 2.2W Audio Amplifier Plus Stereo Headphone Function. General Description. The HM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4Ω load(Note 1) or 2.5W to a 3Ω load(Note 2) with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode to drive stereo …
TBA820M Minidip 1.2W Audio Amplifier - Datasheet
https://circuits-diy.com/tba820m-minidip-1-2w-audio-amplifier-datasheet/
TBA820M Minidip 1.2W Audio Amplifier – Datasheet. The T8A820M is a monolithic integrated audio amplifier in an 8 lead dual-in-line plastic package. It is intended for use as a frequency class B power amplifier With a Wide range Of supply volt- 3 to 16V, in portable radios, cassette recorders, and players, etc.
Now you know 2w Audio Amp
Now that you know 2w Audio Amp, we suggest that you familiarize yourself with information on similar questions.
