We have collected the most relevant information on Alsa Audio Test. Open the URLs, which are collected below, and you will find all the info you are interested in.
Using ALSA's speaker-test utility - MythTV Official Wiki
https://www.mythtv.org/wiki/Using_ALSA's_speaker-test_utility
Judging from the above, the ALSA driver is aware of the possibility of a 5.1 surround system configuration, so one could perform a connection test to make sure sound is going to the proper speakers in 5.1 configuration by selecting -c6 and -Dplug:surround51.
Alsa Opensrc Org - Independent ALSA and linux audio ...
https://alsa.opensrc.org/Speaker-test
To test your ALSA setup... Contents 1 First Step 2 Just stereo sound from one stereo jack 3 A 4 speaker setup from two stereo jacks 4 A 5.1 speaker setup from three stereo jacks 5 2-speaker test using the spdif (coax or optical) output First Step
SoundcardTesting - AlsaProject
https://www.alsa-project.org/main/index.php/SoundcardTesting
1 Rule of Thumb 2 Playback 3 Recording 4 Default Device Rule of Thumb Try the programs in alsa-utils package at first for testing. But above all, double-check your mixer setting before testing the sound! Playback In most sound cards, you'll need to unmute and adjust Master and PCM volumes. Don't forget unmute it!
Alsa-sound-mini-HOWTO: Testing and using
https://tldp.org/HOWTO/Alsa-sound-6.html
In kernel 2.2.x ALSA uses the kernel soundcore and therefor cannot emulate /dev/sndstat, since it would interfere with the OSS drivers. 6.2 The mixer Once the drivers for your sound card have been installed and your /proc filesystem tells you so, you can try to make a real sound. To do this, you need to set the mixer volumes to a reasonable value.
speaker-test(1) — alsa-utils — Debian testing — Debian ...
https://manpages.debian.org/testing/alsa-utils/speaker-test.1.en.html
speaker-test - command-line speaker test tone generator for ALSA SYNOPSIS ¶ speaker-test [-options] DESCRIPTION ¶ speaker-test generates a tone that can be used to test the speakers of a computer. speaker-test by default will test the default device.
Alsa Test Sound? - LinuxQuestions.org
https://www.linuxquestions.org/questions/linux-general-1/alsa-test-sound-4175536682/
With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use. Exclusive for LQ members, get up to 45% off per month. Click here for more info. Search this Thread Tags
How to test microphone with Audio Linux Sound Architecture ...
https://linuxconfig.org/how-to-test-microphone-with-audio-linux-sound-architecture-alsa
In the above example we have recorded audio via microphone using the QuickCam Pro 9000 as specified by --device="hw:1,0" as in card 1 and device 0 from the arecord -l output in the previous step. Now confirm that the source was recorded correctly using aplay: # aplay /tmp/test-mic.wav
speaker-test(1) — Arch manual pages
https://man.archlinux.org/man/extra/alsa-utils/speaker-test.1.en
speaker-test - command-line speaker test tone generator for ALSA SYNOPSIS speaker-test [-options] DESCRIPTION speaker-test generates a tone that can be used to test the speakers of a computer. speaker-test by default will test the default device.
AlsaProject
https://alsa-project.org/wiki/Main_Page
The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. ALSA has the following significant features: Efficient support for all types of audio interfaces, from consumer sound cards to professional multichannel audio interfaces. Fully modularized sound drivers.
Now you know Alsa Audio Test
Now that you know Alsa Audio Test, we suggest that you familiarize yourself with information on similar questions.
