We have collected the most relevant information on Antec Front Panel Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Guide - Antec 300 front panel audio fix | bit-tech.net Forums
https://forums.bit-tech.net/index.php?threads/antec-300-front-panel-audio-fix.208880/
In Antec cases, the front panel audio ports have their ground connected to the USB grounds and through them to the case. This apparently sets up a ground loop as the ports are then earthed through both the motherboard and the case.
Antec Sonata Front Panel Audio | Tom's Hardware Forum
https://forums.tomshardware.com/threads/antec-sonata-front-panel-audio.646465/
> I attached the front panel audio connector on my Antec Sonata using the > standard 10-pin Intel connector on my Asus P4P800 motherboard. When I plug > in a set of speakers or headphones to the front audio inputs, and I switch > the audio to the left and right channel, it goes the opposite way. >
How to connect Front panel audio on | NVIDIA GeForce …
https://www.nvidia.com/en-us/geforce/forums/geforce-graphics-cards/5/72451/how-to-connect-front-panel-audio-on-antec-900-780/
Antec front panel audio cable comes with 2 connectors (AC97 audio plug and HD audio Plug) I connected the AC97 plug into the front audio labeled below. also the HD Audio plug on the antec 900 is 10 pins, whereas the HD audio pins group on the mobo seems to be 16 Given 900 is a popular case, has anyone here gotten their 780i front audio to work ...
Antec 900 front panel audio noise | [H]ard|Forum
https://hardforum.com/threads/antec-900-front-panel-audio-noise.1311033/
Messages. 337. Whenever you use front-panel audio jacks, you always introduce another element in the mix that can screw up your signal path. It doesn't matter how nice your case is (Antec 900 is a great case btw), you always risk introducing noise to your clean audio signal. It's good practice to NOT use front panel jacks in general.
Antec One front panel audio problem, no Jack Sensing ...
https://forums.anandtech.com/threads/antec-one-front-panel-audio-problem-no-jack-sensing.2292272/
Hi, I m having a problem with the front panel audio with my new Antec One case. While the headphone jack plays sound fine the problem is that it doesn t detect when headphones are plugged in and does not mute the rear speakers. Jack Sensing is not working at all and Realtek HD Audio...
Nine Hundred - Front Port Replacement - Antec America support
http://support.antec.com/support/solutions/articles/1000184694-nine-hundred-front-port-replacement-
11. Flip the top panel back over. 12. Replace the panel on top of the chassis starting with the front clips and working your way back. 13. Secure the top panel with the screws from step 4. Be sure to attach the ground wire coming off the new front port assembly to one of these screws. 14. Plug in the USB, audio cables, and any front panel ...
Now you know Antec Front Panel Audio
Now that you know Antec Front Panel Audio, we suggest that you familiarize yourself with information on similar questions.
