Aquarian Audio H2a Xlr

H2a-XLR Hydrophone - Aquarian Audio

https://www.aquarianaudio.com/h2a-xlr-hydrophone.html

The H2a-XLR hydrophone is designed to work with any PA system or recording device that offers a balanced, phantom-powered, microphone input. It uses the same low-noise, robust transducer assembly as our H1 hydrophone, but includes a low noise internal buffer amp.

H2a > XLR Adapter - Aquarian Audio

https://www.aquarianaudio.com/h2a-xlr-adapter.html

This adapter will allow you to use the H2a with any professional preamp designed to work with condenser microphones. 3.5mm TS jack to 3-pin male XLR plug. The combination of this adapter with the H2a gives you the functionality of plugging into almost any standard microphone circuit. Made with high-quality shielded cable and gold connectors.

H2a Hydrophone - Aquarian Audio

https://www.aquarianaudio.com/h2a-hydrophone.html

The H2a hydrophone is designed to work with any recording device, computer, or transmitter that offers a plug-in-powered, 3.5mm microphone input. It uses the same low-noise, robust transducer assembly as the H1a, but includes a low noise internal impedance buffer amp. Operation is very simple: just connect to your recorder or computer and use.

Aquarian Audio Products H2a-XLR Hydrophone …

https://www.aquarianaudio.com/AqAudDocs/H2a_XLR_manual.pdf

H2a-XLR > 3.5mm Adapter - Aquarian Hydrophones

https://www.aquarianaudio.com/h2a-xlr-3.5mm-adapter.html

H2a-XLR > 3.5mm Adapter. This adapter will allow you to use the H2a-XLR hydrophone with any preamp designed to work with electret-condenser microphones. Three-pin female XLR jack to 3.5mm stereo plug. The combination of this adapter with the H2a-XLR gives you the functionality of plugging into almost any standard microphone circuit.

H2a-XLR Hydrophone User’s Guide - Aquarian Audio

http://www.aquarianaudio.com/AqAudDocs/H2a_XLR_manual_balanced.pdf

Aquarian Audio Products H2a-XLR Hydrophone User’s Guide Thank you for purchasing your Aquarian Audio Products H2a-XLR hydrophone. This hydrophone is designed to provide high-quality audio performance in a low-cost device. It is very durable and will interface directly with professional audio microphone preamps. It offers very good

Aquarian H2a XLR - stephan schütze

http://www.stephanschutze.com/reviews/aquarian-h2a-xlr

The Aquarian H2a XLR is a purpose built underwater microphone designed to connect to any standard audio system via an XLR connector with phantom power. The entire unit is sealed against water and can be purchased with a range of cable lengths to allow recording at greater depths. The average unit comes with a 9 meter cable, but it is possible ...

Aquarian Audio H2a-XLR Hydrophone Test - YouTube

https://www.youtube.com/watch?v=eo4yGVcbmJs

H2c Hydrophone - Aquarian Audio

https://www.aquarianaudio.com/h2c-hydrophone.html

H2c Hydrophone. Thread-mount version of our popular H2a and H2a-XLR hydrophones. 1/4" NPT (National Pipe Thread) with 7/16" (12mm) wrench flats. Standard configuration includes 1/2-meter cable with stripped and tinned wire termination. Plug-in power or phantom power is required and may need to be switched on in your preamp or recorder.

Aquarian Audio H2A XLR Hydrophone | Donki Ra | Reverb

https://reverb.com/item/43337522-aquarian-audio-h2a-xlr-hydrophone