We have collected the most relevant information on Asterisk Audio Problem. Open the URLs, which are collected below, and you will find all the info you are interested in.
Asterisk Sound Problem - Asterisk Support - Asterisk Community
https://community.asterisk.org/t/asterisk-sound-problem/65769
Hi, I have a problem about sound but I don’t know how can I fix it. When I watched to CLI log I can’t see anything. Could you give me a suggestion . Problem is; I have two extensions that are 1001(Yealink T28) and 1002(Xpeech Dect). When I tried to call from 1002 to 1001 there is no problem but when I tried to call from 1001 to 1002. 1002 ishearing me but I can’t hear it.
One way audio problem in trunk - Asterisk SIP - Asterisk ...
https://community.asterisk.org/t/one-way-audio-problem-in-trunk/72567
Hello. I got some problem for Asterisk SIP trunk. It’s Asterisk 11.17.1. SIP trunk from an operator. Outgoing call : Everything is ok Incoming call : Call signaling is ok but audio RTP is one way. Peer A,B and C can send audio packet to Peer X but it isn’t able to receive audio packet from Peer X. Network : [Asterisk trunk] ------- [VoIP Provider's Router] ---------- [VoIP …
Audio problem with Public Network - Asterisk SIP ...
https://community.asterisk.org/t/audio-problem-with-public-network/86002
My Asterisk and one of the clients using Zoiper Softphone are behind NAT. Another Client is an iPhone running on 4G network. I have configured my router to forward 5060/UDP and ports 10000-20000/UDP as well. Problem I am having is when one client calls the other, the call goes through, but no audio is present in either client.
voip - Asterisk not playing audio - Stack Overflow
https://stackoverflow.com/questions/48278256/asterisk-not-playing-audio
Use wireshark to perform the capture. You should see signalling for the call setup and then the associate RTP. If you see RTP sent by asterisk and not received at your client then you have a firewall issue. You should be able to see the SDP in the SIP signalling to determine what ports are being requested by the client and asterisk.
Speech Server audio problems with Asterisk
https://social.microsoft.com/Forums/en-US/41a2f795-bc1e-483c-80a2-443ee09be0d7/speech-server-audio-problems-with-asterisk
After a bit of investigation it seems that Asterisk behind a NAT is plagued with all sorts of these problems: one-way audio, no audio, etc. I'm wondering if there is a better solution than using Asterisk as the middle man; it would definitely be better if the solution was Windows-based as well and that it would handle the TCP<=>UDP issues.
12.2 jail, where is Asterisk audio? | TrueNAS Community
https://www.truenas.com/community/threads/12-2-jail-where-is-asterisk-audio.98788/
42 minutes ago. #1. I am testing an Asterisk jail. I install asterisk18 (because LTS). Phones working good. Only problem i have, no asterisk audio. The playback functionality. Just to be sure i tried another jail with asterisk 16. Same results.
Sound quality problems (Choppy) - Asterisk PBX - Spiceworks
https://community.spiceworks.com/topic/165774-sound-quality-problems-choppy
Derbyd, This is was an old thread. We did discover the problem being combination caused by high pings to the ISP and a online backup that was delayed running during business hours. When we had choppy sound, we tested the pings from the server to the ISP and noticed very high ping times (300ms and above).
SIP with NAT or Firewalls - Asterisk Guru
http://asteriskguru.com/tutorials/sip_nat_oneway_or_no_audio_asterisk.html
SIP with NAT or Firewalls. 1.1. Problem Description: Most conventional voip protocols (SIP, h323, …) are not programmed with NAT in mind, on itself they only carry call signaling (call setup, teardown,… and use RTP to carry the audio samples. The signaling usually uses fixed and standardized ports, but the RTP uses random ports to exchange ...
Asterisk 16.4 & WebRTC = no audio - Asterisk WebRTC ...
https://community.asterisk.org/t/asterisk-16-4-webrtc-no-audio/83624
Hello there, we’ve just tried our fist webrtc test with Asterisk 16.4.0 The endpoints get registered well and it’s able to send calls without problems … but without audio. This is the Asterisk CLI: -- Executing […
Now you know Asterisk Audio Problem
Now that you know Asterisk Audio Problem, we suggest that you familiarize yourself with information on similar questions.
