We have collected the most relevant information on Audio 2 Canon Xl1. Open the URLs, which are collected below, and you will find all the info you are interested in.
XL1 Audio Step by Step, Part Two provided by Canon USA
https://www.dvinfo.net/canon/articles/article69.php
The XL1 s 3.5mm stereo mini jack is used for the supplied microphone. Audio 1 and Audio 2 refer to the physical location of the audio inputs. The Audio 1 terminals appear on the back of the camcorder, the Audio 2 terminals are on the right side of the handle. Stereo 1 and Stereo 2 refer to the stereo tracks available on the tape. Audio Monitor
Canon U.S.A., Inc. | XL1
https://www.usa.canon.com/internet/portal/us/home/products/details/camcorders/support-professional-camcorders/xl1
<br/> IEEE 1394 (DV Terminal)<br/> The XL1 is equipped with a DV terminal that conforms to IEEE 1394 for digital transfer of video and sound, in addition to regular video and audio outputs. It takes just a single digital cable to edit, copy and record your video virtually free from generation loss in image and sound quality.
Amazon.com : Canon XL1 Digital Camcorder Kit …
https://www.amazon.com/Canon-XL1-Camcorder-Discontinued-Manufacturer/dp/B000050FA5
The XL1 records digital audio, with two channels of 16 bit/48 KHz sound or 4 channels of 12 bit/32 KHz sound. The electronics of the XL1 have many advanced features, including a number of programmed AE modes, as well as both shutter and aperture priority modes.
XL1 Audio Step by Step, Part Three provided by Canon USA
https://www.dvinfo.net/canon/articles/article70.php
2 If you wish to use Audio 2, plug the MA-100 RCA jacks into the Audio 2 terminals (on the right side of the handle), and set the Audio 1 Input Select to MIC. See also Part One, Part Two and Part Four of XL1 Audio Step-by-Step by Canon USA Back …
the CANON XL1 - Digital Journalist
http://digitaljournalist.org/issue9712/canonxl1review.htm
the CANON XL1 Platypus Claws-on Review ... It is this audio 2 section that you will use with a wireless mic, a mixer, or a mult, without interfering with your audio 1 stereo settings. For connecting audio components, Canon opted for two stereo sets (4 channels) of inputs, which use sturdy RCA or phono plugs. With the addition of the "pro mount ...
Capturing the 2nd Channel of Audio during Playback - XL1S ...
https://www.dvinfo.net/forum/canon-xl1s-xl1-watchdog/239383-capturing-2nd-channel-audio-during-playback-xl1s.html
The XL1 will output AUDIO2 over fire wire if it is present in 12-bit St-1&2 mode, provided the capture software speaks/understands 12-bit 4-channel audio, so the XL1s should as well. However, many NLE's do not speak/understand/capture 4-channel via firewire.
Now you know Audio 2 Canon Xl1
Now that you know Audio 2 Canon Xl1, we suggest that you familiarize yourself with information on similar questions.
