We have collected the most relevant information on Audio Channel Configurations. Open the URLs, which are collected below, and you will find all the info you are interested in.


Setting the Audio Channel Configuration

    https://www.audiokinetic.com/library/edge/?source=Help&id=setting_audio_channel_configuration
    From the menu bar, click Audio> 5.1 Channel Configuration . 7.1 Channel Configuration. From the menu bar, click Audio> 7.1 Channel Configuration . Note; You can select 5.1 or 7.1 Channels Configuration while the Windows Control Panel is set to stereo. However, be aware that this will probably force the audio system to downmix from 5.1 or 7.1 to ...

KSPROPERTY\_AUDIO\_CHANNEL\_CONFIG - Windows …

    https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/ksproperty-audio-channel-config
    For more information about speaker configurations, see DirectSound Speaker-Configuration Settings. DirectSound also uses the KSPROPERTY_AUDIO_CHANNEL_CONFIG property to query a "pan" node for its channel configuration. A pan node is the second volume node (KSNODETYPE_VOLUME) on a mixer pin that meets the DirectSound node-ordering …

KSAUDIO_CHANNEL_CONFIG (ksmedia.h) - Windows …

    https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ksmedia/ns-ksmedia-ksaudio_channel_config
    The speaker configuration for a 5.1-channel surround format is defined by the constant KSAUDIO_SPEAKER_5POINT1_SURROUND in the preceding table. The geometric layout of the speakers is shown in the following figure, which shows the positions of the front-left, front-right, front-center, side-left, and side-right speakers.

Applying Speaker-Configuration Settings - Windows …

    https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/applying-speaker-configuration-settings
    On the Audio tab, select a device from the Sound Playback list. Select the Advanced button. Select the Speakers tab. At this point, you should see the label Speaker Setup next to a list of the speaker configurations that you can select from. DirectSound uses a KSPROPERTY_AUDIO_CHANNEL_CONFIG set-property request to send the speaker ...

Setting Up Multi-Channel Audio - Intel

    https://www.intel.com/content/www/us/en/support/articles/000006687/boards-and-kits/desktop-boards.html
    Audio jack retasking is a feature that allows a jack to support more than one function. For example, the pink audio jack can support microphone input when the system configuration is set to stereo mode, 2-channel, and as Center/LFE or Rear Surround, when set to 6 …

Mapping Stream Formats to Speaker Configurations - …

    https://docs.microsoft.com/en-us/windows-hardware/drivers/audio/mapping-stream-formats-to-speaker-configurations
    In this example, channels 6 and 7, which contain the data for the side speaker positions in the 7.1 configuration, play through the side speaker positions in the 5.1 configuration. The audio device simply discards channels 4 and 5, which contain the data for the back speaker positions in the 7.1 configuration, when it plays the stream on the 5 ...

Now you know Audio Channel Configurations

Now that you know Audio Channel Configurations, we suggest that you familiarize yourself with information on similar questions.