We have collected the most relevant information on Audio Codec Freescale. Open the URLs, which are collected below, and you will find all the info you are interested in.
Freescale codec release note in Android - NXP
https://www.nxp.com/docs/en/supporting-information/i_MX_Android_Codec_Release_Notes.html
Notes: · All video codecs are accelerated with the Video Processing Unit (VPU) except the WMV7/8 decoder and the Sorenson H.263 decoder. · All audio codecs are optimized by Freescale. · Webm is enhanced by Freescale codecs only in i.MX6D/Q SoC. · Support equalizer for audio playback. · ASF, WMV, WMA and AACPLUS need to install Special Codec Package.
Dialog Semiconductor enhances Freescale® Tower …
https://www.dialog-semiconductor.com/media-centre/press-releases/press-releases-details/2013/06/04/dialog-semiconductor-enhances-freescale-tower-system-development-platform-with-latest-advanced-audio-codec-module
Kirchheim/Teck, Germany, 4 June 2013 – Dialog Semiconductor plc (FWB: DLG), a provider of highly integrated power management, audio and short-range wireless technologies, announced today a new audio codec reference module – based on its DA7321 audio codec – for Freescale Semiconductor’s Tower System Development Platform. The DA7321 is ...
The $2.00 stereo audio codec/mixers: TI LM29451, Maxim ...
https://www.thepositiverail.com/blog/the-200-stereo-audio-codecmixers-ti-lm29451-maxim-max9867-and-freescale-sgtl5000
Many of the other manufacturers (Analog Devices, Cirrus, IDT) also offer codecs - but many of these seemed to be concentrated in the higher end of the market, with prices from $6-$20, and a smaller supplier base - so I'll neglect them. Below I'll look at the Maxim and Freescale lines.
Audio (Linux) - Toradex
https://developer.toradex.com/knowledge-base/audio-linux
All modules based on the NXP/Freescale i.MX 6 SoC or i.MX 7 SoC provides an on-module NXP/Freescale SGTL5000 audio codec. The SPDIF signals and Audio through HDMI are available only on modules based on i.MX 6 Soc. HW accelerated decoding and encoding are provided by GStreamer plugins.
SGTL5000 | Ultra-Low-Power Audio Codec | NXP …
https://www.nxp.com/products/audio-and-radio/audio-converters/ultra-low-power-audio-codec:SGTL5000
The SGTL5000 is a low-power stereo codec designed to provide a comprehensive audio solution for portable products that require line-in, mic-in, line-out, headphone-out and digital I/O. Featuring: Ultra-low-power with very high performance and functionality. Capless headphone and an integrated PLL to allow clock reuse within the system that ...
SGTL5000, Low Power Stereo Codec with Headphone Amp - …
http://cdn.sparkfun.com/datasheets/Dev/Teensy/SGTL5000.pdf
The SGTL5000 is a Low Power Stereo Codec with Headphone Amp from Freescale, and is designed to provide a complete audio solution for portable products needing LINEIN, mic-in, LINEOUT, headphone-out, and digital I/O. Deriving it’s architecture from best in class, Freescale integrated products that are currently on the market. The
Android Audio Codecs - NXP Community
https://community.nxp.com/t5/i-MX-Processors/Android-Audio-Codecs/m-p/196688
Freescale audio codec is optimized to freescale board codec, so I don´t think it´s a good codec for your case. Take a look on the board descriptor file (under <my_android>devices/<cmp>) I know there is a variable for PREBUILT true/false. I´m not sure it there is one variable for video codecs and another for audio.
https://lists.yoctoproject.org/g/meta-freescale/topic/sgtl5000_audio_codec/83885119?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,83885119
On Wed, Jun 30, 2021 at 12:53 AM <[email protected]> wrote: Dear colleagues, Does meta-freescale have the driver to control the SGTL5000 audio codec?
Audio codec support - Digi Forum
https://www.digi.com/support/forum/33851/audio-codec-support
It has support for I2C/I2S/SDMA devices except Wolfson audio codec. On the i.MX51 EVK another audio codec (SGTL5000) is installed and it works fine with the same BSP. On the Wi-MX51 we have found that TX FIFO of the SSI interface (base 0x70014000) has been filled (SFCSR [TFCNT]), but it doesn't transmit data to the codec.
SGTL5000XNAA3 by NXP Audio CODECs | Avnet
https://www.avnet.com/shop/us/products/nxp/sgtl5000xnaa3-3074457345626482747/
The SGTL5000 is a low-power stereo codec that includes headphones and is designed to provide a comprehensive audio solution for portable products that require line-in, mic-in, line-out, headphone-out and digital I/O. It consumes less than 4 mw for DAC-to-HP out playback while achieving 98 dB SNR and -80 dB THD+N.
Now you know Audio Codec Freescale
Now that you know Audio Codec Freescale, we suggest that you familiarize yourself with information on similar questions.
