We have collected the most relevant information on Audio Codes Progress Tones. Open the URLs, which are collected below, and you will find all the info you are interested in.
Configuring the correct Call Progress Tones settings for ...
https://www.3cx.com/blog/voip-howto/call-progress-tones/#:~:text=Call%20Progress%20tones%20are%20audible%20tones%20used%20by,a%20busy%20tone%2C%20dial%20tone%20or%20hangup%20correctly.
GitHub - paulseward/audiocodes-cpt: Call Progress …
https://github.com/paulseward/audiocodes-cpt
Call Progress Tones files for Audiocodes MP11x ATAs - GitHub - paulseward/audiocodes-cpt: Call Progress Tones files for Audiocodes MP11x ATAs
User's Guide - AudioCodes
https://www.audiocodes.com/media/12125/ltrt-30521-dconvert-utility-users-guide.pdf
Under the 'Call Progress Tones File' group, click the Select File button. 3. Navigate to the folder that contains the CPT ini file that you want to con vert. 4. Select the ini file, and then click the Open button; the name and path of both the ini file and the (output) dat file appears in the fields below the Select File button. 5.
TrunkPack Downloadable Conversion Utility - …
https://www.audiocodes.com/media/13534/dconvert-utility-users-guide.pdf
Click the Process Call Progress Tones File(s) button; the 'Call Progress Tones' dialog box opens, shown in the figure below. Figure 3-1: Call Progress Tones Dialog Box 2. Under the 'Call Progress Tones File' group, click the Select File button. 3. Navigate to the folder that contains the CPT ini file that you want to convert. 4.
Configuring the correct Call Progress Tones settings for ...
https://www.3cx.com/blog/voip-howto/call-progress-tones/
Call Progress tones are audible tones used by the public switched telephone network (PSTN) central office or a private branch exchange (PBX) to signal calling parties the status of phone calls. VoIP Gateways must understand these Call Progress Tones in order to detect a busy tone, dial tone or hangup correctly.
AudioCodes Gateway Music on Hold Issue Solved
https://blog.enablingtechcorp.com/audiocodes-gateway-music-on-hold-issue-solved
This “Call Progress Tone” file was built by and obtained directly from AudioCodes Support, and isn’t available on their public website. Once uploaded, the unit had to be restarted, and after that PSTN calls placed on hold by a Lync client no longer experienced the “beep” hold-tone every 5 seconds – they just maintain silence for the duration of the hold, as desired.
AudioCodes Native Tools and Utilities Explained – UC ...
https://ucworkerbee.com/2019/08/11/audiocodes-native-tools-and-utilities-explained/
Conversion utility for creating files for Call Progress Tones, Music on Hold (MoH) files, CAS tables, and VXML records. Converts audio files into proprietary AudioCodes format; Create CAS Protocol and Dial Plan files (very seldom used) Coder transcoding feature works very poorly (workaround)
AudioCodes VoIP Gateway Products DATASHEET …
https://www.audiocodes.com/media/2373/mp-1xx-and-mp-124-datasheet.pdf
Call Progress Tones Programmable detection and generation tones, pre-recorded tones generation DTMF In-band and out-of-band signaling, RFC 2833, SIP INFO/NOTIFY Fax Over IP Group 3/super G3 fax over IP, T.38 relay, automatic switching to G.711 IP Networking and Telephony Protocols VLAN 802.1 p/Q VLAN tagging IP Transport IPV4/IPV6*, DiffServ, TOS
AudioCodes Mediant 800, v6.6 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_Mediant_800,_v6.6_and_higher
These tones are region specific and telephone exchange dependent. The Call Progress Tones (CPT) configuration file is a binary file (with the extension .dat). You can either use: a CPT file with the most common tone patterns available from the download site; one of the supplied CPT (dat) files found on the CD provided with the gateway
Now you know Audio Codes Progress Tones
Now that you know Audio Codes Progress Tones, we suggest that you familiarize yourself with information on similar questions.
