We have collected the most relevant information on Audio Com Superclock 3. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audiocom Superclock 3. A $300+ mistake? | Headphone ...
https://www.head-fi.org/threads/audiocom-superclock-3-a-300-mistake.107777/
Hopefully the Superclock 3 has all that. There is plenty of room inside the Bel Canto DAC2 for upgrades. I think it's pretty important to have side by side comparisons with stock vs. modded to hear the real difference. Placebo effect is just too strong. Especially if you fork over $300 to change one little part.
Audiocom Superclock 3. A $300+ mistake? | Page 2 ...
https://www.head-fi.org/threads/audiocom-superclock-3-a-300-mistake.107777/page-2
The SuperClock x03 uses a Black Gates 25v, 4700 uF capacitor operating at 24.576 MHz. The Clock Power Supply uses a pair of Black Gates capacitors with 2200 uF each. That's as much information as I could get to you. Anyway, here are some close up photographs: LC Audio SuperClock x03:
Audiocom Superclock 3 V2.5 *free ... - Canuck Audio Mart
https://www.canuckaudiomart.com/details/117379-audiocom_superclock_3_v25/
Welcome to CanuckAudioMart, a classifieds site for used audio and hifi. ... Home > Classifieds > Digital Sources > Audiocom Superclock 3 V2.5 *free shipping* SOLD - FOR SALE: Audiocom Superclock 3 V2.5 *free shipping* Watch Report This Ad. Item #117379. Info: Audiocom Superclock 3 V2.5 *free shipping* Asking Price: CAD $ 100.00.
Audiogon Discussion Forum
https://forum.audiogon.com/discussions/where-to-install-superclock3-transport-or-dac
I had a Superclock 3 installed by RAM in my CEC TL-1X transport as part of an overall upgrade. (See RAM website for full description.) I cannot tell whether it was the Superclock or the other mods or the combo, but there was a dramatic improvement in performance: tightended CEC's sometimes loose bass; better and more sparkling treble; wider …
The AudioCom "Superclock" CD Player Replacement Clock
https://www.tnt-audio.com/accessories/sclock_e.html
I fitted the Superclock to a Pioneer DV-505 DVD Player to which previously a number of other modifications had been made. To briefly cover these, C37 Lacquer was used extensively on both transport and PCB's, Chips where shielded using copper-foil and the analogue output stage had been replaced by a purely passive arrangement. Now to fit the Clock.
Re: superclock 3 inside a Tosh 3960? - crylon - DVD-Audiobahn
https://www.audioasylum.com/forums/dvda/messages/2/21943.html
Re: superclock 3 inside a Tosh 3960? 69.214.7.115. Posted by crylon on June 22, 2005 at 14:42:20 In Reply to: Re: superclock 3 inside a Tosh 3960? posted by Gmood1 on June 21, 2005 at 18:28:03: This is my first mod and I share the same sedaments.
Audiocom Superclock 4
https://theartofsound.net/forum/showthread.php?6499-Audiocom-Superclock-4
Also, we realised with earlier generation of Superclock that it is the low frequency noise which is crucial to audio performance. This is the sub 10 Hz noise, even as low as 0.1 Hz! The problem with this band of noise is that no commercially available regulator can provide low noise below 10 Hz.
Audiocom Superclock 4 - Page 3
https://theartofsound.net/forum/showthread.php?6499-Audiocom-Superclock-4/page3
When we released Superclock 3 to our distributors, they reported back that version 3 made Superclock 2 sound broken. The Superclock 4 is another considerably step-up from version 3. ... (digital or analogue domain), noise & speed of regulated supplies, etc. For audio it is low frequency jitter, 0.1 – 10 Hz that is the worst and most audible ...
word clock vs superclock 3 in modded squeezebox ...
https://www.head-fi.org/threads/word-clock-vs-superclock-3-in-modded-squeezebox.110399/
A superclock will simply improve the digital output which might or might not give you better sound depending on your DAC. If someone can really mod the SB to have a wordclock input then a combination with a Univeral Audio 2192 DAC could be a killer combination.
What is "Superclock"?
https://www.sweetwater.com/insync/superclock/
Superclock. A term coined by Digidesign in the early days of Pro Tools. Pro Tools has always operated at an internal timing resolution of 256x the sample rate. In order for multiple audio interfaces to be able to remain locked together in a system it was necessary to carry this clocking information between the interfaces themselves.
Now you know Audio Com Superclock 3
Now that you know Audio Com Superclock 3, we suggest that you familiarize yourself with information on similar questions.