We have collected the most relevant information on Audio Interface Psk31. Open the URLs, which are collected below, and you will find all the info you are interested in.
PSK31 Setup and Operation | bpsk31.com
https://bpsk31.com/operation/
PSK31 software will output audio to the PC's soundcard to send a transmission, however a mechanism must exits for keying the radio to transmit an RF signal, as well as link the audio tone to the radio's audio input. Therefore some form of soundcard interface may be used. It might simply be an audio cable with a radio with VOX capabilities, or ...
Building an interface for PSK31 and SSTV
http://www.staffordengineeringsystems.co.uk/Data/radio/Yaesu/FT-902/buildPSK.pdf
option, install it in the transmit audio input to your transceiver anyway. If you elect to use this capacitor, BE SURE to install it with the 'PLUS (+) lead towards the microphone inputor the transceiver audio input. The remaining lead connects toward the (RED) isolation (PSK31 Tx audio out) transformer lead.
Sound Card Interfacing for RTTY, PSK31, and SSTV - IW5EDI ...
http://www.iw5edi.com/ham-radio-reference/sound-card-interfacing-for-rtty-psk31-and-sstv
Another approach to interfacing is contained in the following schematic obtained from WM2U’s home page related to PSK31 and should work for PSK31, RTTY, and SSTV. The simplest and quickest computer to radio interface is to connect the Line Output from the Sound Card to the transceiver audio input with a 100:1 voltage
PSK31 & SSTV interface box
http://mymorninglight.org/ham/PSKbox.htm
N1NKM's PSK31 / SSTV interface This page contains a schematic & photos to help you build a nice computer sound card interface. It has two pots, allowing complete and independent control of the receive and transmit audio levels between the computer and your rig.
Ham Radio CAT, PSK31, FT8, JT9 and JT65 Interfaces - …
http://www.xggcomms.com/Icom-Interface-Shop(2066628).html
With this interface, you will be up and running on FT8, PSK31, Echolink, SSTV, Pactor, Packet or any mode that requires CAT control and Tx/Rx Audio Interfacing between your PC Soundcard and Radio within minutes. Cable length is 1.5m from the USB and audio connectors to the interface box. The cables from the interface box to the transceiver is 0.6m.
Ham Radio CAT, PSK31, FT8, JT9 and JT65 Interfaces - …
http://xggcomms.com/Xiegu--Wouxon-Shop(2066631).html
External USB Sound Card isolated audio interface allowing you to operate many AFSK digital modes such as PSK31, FT8, JT9, JT65 and Echolink. Fully plug and play. Simply plug the USB cable into your PC and the Data plug into your transceiver. Perfect with digital mode applications such as DM780, WSJT-X, FLDigi, Echolink etc.
Now you know Audio Interface Psk31
Now that you know Audio Interface Psk31, we suggest that you familiarize yourself with information on similar questions.