We have collected the most relevant information on Audio Mode 12bit 16bit. Open the URLs, which are collected below, and you will find all the info you are interested in.
Canon Knowledge Base - Setting up the various audio modes ...
https://support.usa.canon.com/kb/index?page=content&id=ART125203
Selecting the Audio Mode (16bit, 12bit CH , 12bit CH , ) Press the <MENU> button to open the menu and select [AUDIO SETUP]. Select [AUDIO MODE], select a setting option and close the menu. Recording on Channels 1 and 2. Select the audio input from FRONT MIC (supplied microphone unit), AUDIO1 (RCA terminals) or REAR (XLR terminals).
12 bit or 16 bit recording - VideoHelp Forum
https://forum.videohelp.com/threads/209485-12-bit-or-16-bit-recording
In my experience (based on the two DV cams I own), 12 bit audio is sampled at a frequency of 32KHz whereas 16 bit audio is sampled at 48KHz. As your DV footage is going to DVD, and DVD specs require 48KHz audio, 16 bit is the one to go for.
12bit or 16bit MiniDV audio - which is best? | AVForums
https://www.avforums.com/threads/12bit-or-16bit-minidv-audio-which-is-best.904514/
With the Sony DCR-HC62 MiniDV camcorder, the options for audio recording within the unit are either: - 12bits / 32KHz ('2 stereo sounds') - 16bits / 48KHz ('1 …
12 bit & 16 bit - Noticeable quality difference? at DVinfo.net
https://www.dvinfo.net/forum/canon-xl1s-xl1-watchdog/50018-12-bit-16-bit-noticeable-quality-difference.html
If you want to record from 4 channels (two wireless and the stock stereo mic) you have to use 12-bit mode with ST-1 and ST-2. If you want 16-bit recording, you will need to mix the four channels of sources down to two channels using an external mixer, and that may require some adapters for the XL standard mic (if you intend to use it) to ensure it gets power as swell …
How to only keep the 12 most significant bits of 16bit …
https://stackoverflow.com/questions/54297424/how-to-only-keep-the-12-most-significant-bits-of-16bit-pcm-audio-data
I am trying to figure out how to reduce the bit depth of a 16bit wav file to 12bit by truncating the data and dropping the 4 least significant bits. My best guess is I need to convert the data (which seems to be in signed short integer form) into 16 bit unsigned and shift the bits right by 4, then convert back to short.
What does 12- or 16-bit resolution mean? | LabJack
https://labjack.com/support/faq/what-does-12-or-16-bit-resolution-mean
A 12-bit digital value can represent 4096 (2 12) different numbers. A 16-bit digital value can represent 65536 (2 16) different numbers. It might occur to you at this point that a digital input could be thought of as a 1-bit analog to digital converter. Low …
audio - Resample to 12bit PCM sound? - Stack Overflow
https://stackoverflow.com/questions/28274456/resample-to-12bit-pcm-sound
In the Audio Track menu you can use Set Rate to change the samling rate to 25000 Hz. That only changes the replay speed, so you need to resample it also. That is done with Change Speed in the Effect menu. The speed change is 44100/25000 = 1.764, which is 76.4% faster. Now you can export the track to the 12-bit format that you want.
Audio Converter •• Wav to MP3 or 16 bit •• Stereo to …
https://www.3cx.com/docs/converting-wav-file/
If you are using a stereo file, click on the audio file name in the track editor and select “Split Stereo to Mono”. Click on the “X” button in the audio track properties to remove the second track. set “Save as type” to “WAV (Microsoft) signed 16-bit PCM”. Click on “Save”.
Now you know Audio Mode 12bit 16bit
Now that you know Audio Mode 12bit 16bit, we suggest that you familiarize yourself with information on similar questions.
