We have collected the most relevant information on Audio Note Pq. Open the URLs, which are collected below, and you will find all the info you are interested in.
Mostly Audio - Building an AudioNote PQ Signature Kit1
https://www.mostlyaudio.com/PQBuildMain.html
Some of the differences between this (the PQ Signature Edition) and the standard Kit1 (at time of writing) are: Tantalum Resistors throughout. Black Gate capacitors on driver and 300B circuits. AudioNote AN-v silver input cable. AudioNote Copper Foil capacitors on the driver board. AudioNote Silver speaker terminals.
Mostly Audio - Building an AudioNote PQ Signature Kit1
https://www.mostlyaudio.com/PQB_OutputTxs.html
AudioNote PQ Signature Kit1 - Output Transformer Assembly. Now it was time to fit those huge output transformers that come with the PQ Signature version of the Kit1. I had decided to go with the copper transformer covers (these come at an extra cost). As well as looking good, they also theoretically improve low frequency resolution and distortion.
Mostly Audio - Building an AudioNote PQ Signature Kit1
https://www.mostlyaudio.com/PQB_PSUBoard.html
of 13. Hi-Fi Kit Building. AudioNote PQ Signature Kit1 - Power Supply Board Construction. As with all the other boards (except the filament board which is too cramped), I decided to use PCB pins for the interconnect wires. The pins were the first things to be fitted - they fit snugly and require pushing gently in with pliers.
Mostly Audio - Building an AudioNote PQ Signature Kit1
https://www.mostlyaudio.com/PQB_MainsTxAndChoke.html
of 13. Hi-Fi Kit Building. AudioNote PQ Signature Kit1 - Fitting the Mains Transformer and Choke. The first major construction step was to fit the stainless steel shrouds onto the mains transformer and choke. I was expecting this to be a difficult step as you have to separate the existing frames from the laminates that had been varnish ...
Mostly Audio - Building an AudioNote PQ Signature Kit1
https://www.mostlyaudio.com/PQB_Interwiring1.html
AudioNote PQ Signature Kit1 - Wiring Looms. I had already decided that I wanted to create wire looms in this project. One reason for this was that I had not done it for at least 20 years and wanted to see if I could still remember how to. Also, the way shown to manage the wiring in the manual was to wire everything up and tidy up later with tie ...
Now you know Audio Note Pq
Now that you know Audio Note Pq, we suggest that you familiarize yourself with information on similar questions.
