We have collected the most relevant information on Audio Pots Linear Pots. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio or linear taper pots? What’s the difference ...
https://www.hoaglandcustom.com/2017/05/15/hello-world/
When you dial up a linear pot, the signal increases in a very predictable, linear way… At “1”, it gives you 10% of the available signal. At “4”, it gives you 40% of the available signal and at “9”, it gives you 90% of the available …
Audio or Linear Pots? — Six String Supplies
https://sixstringsupplies.co.uk/pages/audio-or-linear-pots
Bottom line – choose what is best suited to you. Linear pots will give a uniform decrease in volume/tone (you will notice more of an effect on each control knob setting) whilst audio will give a more instant (quicker) increase or decrease in volume or tone. If you gig a lot, audio may be better for a quicker boost while on stage.
Do you use audio or linear pots for tone? - Gelvin Guitars
https://rocksolidpickups.com/2021/11/26/do-you-use-audio-or-linear-pots-for-tone/
Volume pots should be linear and tone should be audio taper. Most people suggest the opposite because they are confusing an amplified circuit with an RC circuit. The tone of your guitar is not an amplifier circuit where an audio taper would come into play. It is a capacitor resistor circuit. The two are different and should be treated as such.
Linear vs audio taper for volume pot? | The Gear Page
https://www.thegearpage.net/board/index.php?threads/linear-vs-audio-taper-for-volume-pot.2270640/
Our ears' perception of volume is not linear therefore audio taper (log) pots adjust volume in a fashion that makes the sound appear to be linear throughout the range. Linear pots adjust gain in a linear fashion, irrespective of how volume is perceived, which has the effect on the ear of a steep curve where anything less than 7 is essentially off.
Potentiometers: Audio vs. Linear Tapers
https://www.jameco.com/Jameco/workshop/circuitnotes/Potentiometers-audio-taper-vs-linear.html
Potentiometer taper is the relationship between the position and resistance of the pot. In a linear taper the relative position is equal to the resistance ratio. For example, rotating the potentiometer to 50% will cause the pot to function at 50% of the maximum resistance. Linear tapers can be good for adjusting lighting through light dimmers or for motion control. Non-linear tapers are …
Audio or Linear taper tone pots?? | Gretsch-Talk Forum
https://www.gretsch-talk.com/threads/audio-or-linear-taper-tone-pots.205902/
The stock (audio taper) pot was only usable from about 0-5 but the linear will be all the way from 0-10. To make it clearer, a linear pot has a smooth, even change in resistance as you turn the knob. 2 will be about 20% of the total resistance, 4 will be 40%, 6 will be 60%, etc.
linear taper v. audio taper pots? | Telecaster Guitar Forum
https://www.tdpri.com/threads/linear-taper-v-audio-taper-pots.309826/
With linear taper pots, the volume (or tone) diminishes very fast in the first 1/4 turn of the pot, then very little happens with the next 3/4 of the rotation. Unless you have a very specific reason to use a linear taper pot in a guitar, don't. There's a …
Tone Pots: Linear or Audio? Why? - Music Electronics Forum
https://music-electronics-forum.com/forum/instrumentation/guitar-tech/1146-tone-pots-linear-or-audio-why
The general rule of thumb is that audio taper is used for volume and anything approximating the volume-like function, where linear is used whenever knowing the "middle" of something is important. As you might expect, linear pots are used for things like blend/mix/balance controls, as well as for EQ controls where identifying exactly where you are …
Tone Pots: Audio or Linear taper? | The Tone Rooms
https://www.thetonerooms.com/threads/tone-pots-audio-or-linear-taper.5703/
I'm experimenting with my (PGK) SG Junior. Originally, the pots are a 500k audio taper Volume pot and a 250k audio taper Tone pot feeding a P90. I'm trying a 500k linear pot for the tone, and I'm not digging it any more than the 250k audio pot that was in there originally.
Audio VS. Linear | My Les Paul Forum
https://www.mylespaul.com/threads/audio-vs-linear.51147/
Linear pots for tone are pure nonsense. You do not want any other than audio taper there. Vol pots are more complicated matter. Linear taper is to slow, audio taper is too fast. Hence custom taper like RS Superpots (not affiliated,just happy customer). my .02$
Now you know Audio Pots Linear Pots
Now that you know Audio Pots Linear Pots, we suggest that you familiarize yourself with information on similar questions.
