We have collected the most relevant information on Audio Production Jargon. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audio Terms: EVERY Term DIY Musicians Need to Know
https://www.musicianonamission.com/audio-terms-by-subject/
Mix bus (or Submix, Stereo output, Mix output, or Master output) – The channel that all of the audio of a session flows to. Mono – The opposite of stereo. A sound that has one source, rather than two. Pan pot (or Pan knob) – A …
Studio 101: Audio Production Terminology and Definitions
https://www.dancemusicnw.com/studio-101-audio-production-terminology-definitions/
Here’s the math for this- 1130 x 1,000,000 = 1,130,000,000 = 869,097.33 (times slower) The higher frequency of sound, the shorter the wavelength. For sound waves in air, the speed of sound is 343 m/s (at room temperature and atmospheric pressure).
Audio Engineering Terms & Definitions | Recording …
https://www.recordingconnection.com/glossary/
In audio recording, this refers to converting recorded sound from electrical voltages to computerized data. Attack – The initiation of a sound. In terms of the four stages of a sound (Attack, Decay, Sustain and Release, or ADSR), a sound’s attack is the point where the sound begins and increases in volume to its peak.
Glossary - Teach Me Audio
https://www.teachmeaudio.com/glossary/
The audio glossary has definitions relating to various aspects of audio production. A - B - C - D - E - F - G - H - I - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y. A. Absorption - The dissipation of sound energy through absorbent materials. Acoustics - The science of …
‘Butt cut what?’ A glossary of audio production terms ...
https://training.npr.org/2015/06/01/butt-cut-what-a-glossary-of-production-terms/
Dub (n or v) — Making a recording of a recording (for example, recording audio from a video). Establish (v) — After sound (usually ambience) is swept in, to maintain its volume (see “hold/maintain”...
Electronic Music Production Terms: The Last Glossary …
https://www.edmprod.com/electronic-music-production-glossary/
WAV (Waveform Audio File Format) – A standard lossless audio file format used for its high quality. Most samples, stems and other production-related audio files typically come in WAV format. WAV cannot have the same ID3 tags that an MP3 or AIFF does. Wet – A processed version of a signal, as opposed to the dry, which is the unprocessed ...
Audio Terms and Definitions - Audioholics
https://www.audioholics.com/how-to-shop/audio-terms-and-definitions
Amplifier - an electrical circuit designed to increase the current or voltage of an applied signal. Amplitude - the relative magnitude of a signal. Attenuation - the reduction of an electrical signal. Audio frequency - the acoustic spectrum of human hearing, generally regarded to …
Glossary of Pro Audio Terms - sabadosco.com
http://www.sabadosco.com/wp-content/uploads/2016/01/audio.pdf
A form of severe audio distortion that results from peaks of the audio signal attempting to rise above the capabilities of the amplifier cir-cuit. Seen on an oscilloscope, the audio peaks appear clipped off. To avoid clipping, reduce the system gain in or before the gain stage in which the clipping occurs. Also see headroom. common mode
The Podcast Glossary: Podcasting Terms, Lingo, & …
https://www.thepodcasthost.com/q-and-a/the-podcast-glossary-terms-lingo-jargon/
You can also refer to this as production, post-production, or just plain old editing. Mixing Down (recording/production) When you're happy with your mix in the editing process, you'll then ‘mix down' or ‘bounce down' everything to one single audio file. This is the mixing down process. Mono Audio (recording/production)
Glossary - Sound on Sound
https://www.soundonsound.com/glossary/a
A means of convenying information on a carrier wave by varying its instantaneous amplitude. In an audio application, like AM radio, the wanted audio signal's amplitude is used to create corresponding deviations in the carrier wave's amplitude. A demodulator can detect these deviations and thus recover the base-band audio signal.
Now you know Audio Production Jargon
Now that you know Audio Production Jargon, we suggest that you familiarize yourself with information on similar questions.
