We have collected the most relevant information on Audio Server Gpi Triggered. Open the URLs, which are collected below, and you will find all the info you are interested in.
GPI Output Triggers - Ross Video
https://help.rossvideo.com/graphite/Topics/Operation/CommIO/GPI-Trigger.html
Each pin on the GPI is set as either high (+5 Volts), or low (0 Volts), and it is the switching between high and low that sends commands to the external device, or to the switcher. GPI Trigger Types; GPI Setup. Each GPI pin on the switcher can be configured as either an input, or an output. By default, all GPIs are set as inputs. GPI Output Triggers
GPI Output Triggers - Ross Video
https://help.rossvideo.com/solo/Topics/Operation/CommIO/GPI-Trigger.html
This trigger can be set up to occur automatically any time the video source is transitioned on-air, or it can be triggered manually. Keep the following in mind when working with GPI output triggers: The Roll Clip must be set to On to trigger a GPI output with a transition. Edge triggered GPI outputs remain triggered for the configured duration. Level triggered GPI outputs toggle …
General Purpose Input (GPI) - Viz Content Pilot User's ...
https://documentation.vizrt.com/viz-content-pilot-guide/5.6/configuration_general_purpose_input_gpi.html
Server commands are GPI actions that apply to the Media Sequencer. When right-clicking an item in the playlist, the Playlist menu opens. In this menu, select Cursors, and then Set Next. A red arrow appears next to the selected element in the playlist, which indicates that this is the current GPI cursor. The server commands can be set to:
SkimmerPlus – Broadcast Software International
https://bsiusa.com/product/audiologging/skimmerplus/
Supports multiple professional audio formats, such as PCM and MP3 (optional CODECS may be needed for individual formats) Can be bundled with a Broadcast Tools GPI-16 trigger device or Axia GPI module, allowing record start and stop based on microphone open/close or …
Auto Control GPI Control - lynx-technik.com
https://www.lynx-technik.com/fileadmin/user_upload/LYNX_APPolo_UserGuide_AutoControl.pdf
To start configuring the actions that are to be triggered by GPI Input 1, click on “Add Action…” positioned to the right of the “1” indicating GPI 1. This will activate the device tree to the right of the GPI list (marked in figure 6).
GPIO Interfaces – Broadcast Tools | Problem Solved
https://broadcasttools.com/product-category/gpio-interfaces/
GPI-16 Plus – Serial/USB GPI/Trigger Interface. The GPI-16 Plus interfaces 16 general purpose logic/trigger inputs to users serial COM or USB port. The user may select from two pre-programmed serial formats; the “PIP” GPI format, which is used on most Broadcast Tools audio switchers, or the legacy AT-1616 format making it perfect for broadcast automation applications.
Now you know Audio Server Gpi Triggered
Now that you know Audio Server Gpi Triggered, we suggest that you familiarize yourself with information on similar questions.
