We have collected the most relevant information on Audio Transformer For 2x El34 Push Pull. Open the URLs, which are collected below, and you will find all the info you are interested in.
FS: 2x push-pull output transformers for EL34 50W | diyAudio
https://www.diyaudio.com/community/threads/fs-2x-push-pull-output-transformers-for-el34-50w.354454/
Up for sale are two used EL34 and similar push-pull output transformers pulled out of an vintage tube amplifier the Xindac MT-3. I measured the DCR of the windings and the secondaries are 0-4 ohms = 0.4 ohms; 0-8 ohms = 0.5 ohms. Primary has 2x 130ohms and a center tape. I assume the nominal primary impedance is around 4-5kohms.
EL34 Push-Pull - Hashimoto Sansui Vacuum tube transformer ...
http://www.tube-amps.net/EA_Hashimoto_EL34_PP_01.htm
EL34 Push-Pull Mono-Block Power Amplifiers. This amplifier was featured on the January 2003 Issue of the "High-Fidelity Audio: Radio Technology" by Mr. Tadaatsu Atarashi. The purpose of designing this amplifier was to drive the B&W Signature 800 with 70W maximum output derived from EL34 Push-Pull Class B1 fixed bias operation.
Push-Pull valve output transformer 2xEL34 TES - audioamp.eu
https://www.audioamp.eu/push-pull-valve-output-transformer-2xel34/
TTG-CFB6600PP - Tube output CFB transformer [6,6kOhm] Cathode Feedback EL34, 6L6 Push-pull. Output transformer 2xEL34 45W, Raa 6 kΩ / 4-8-16 Ω Description Ultra-wide bandwidth output toroidal transformer with Cathode Feedback CFB windings introduces benefits of toroidal cores to tube output. Cathode Feedback CFB winding allow You to ...
35W Tube Power Amplifier with EL34 - Schematic Design
https://circuitdiagram.net/35w-tube-power-amplifier-with-el34.html
It is a classic design of power amplifier 35 W using tube, with two EL34 in connection Push-Pull, by Siemens & Halske, with design date 03/24/1953 and code SV410 / 1. The amplifier worked from 1954 to 1989, whenever and went off, with an average lifespan of 15 hours a day.
Mullard EL34 Push-Pull Tube Amp ... - DIY AUDIO PROJECTS
https://diyaudioprojects.com/Schematics/Mullard-EL34-Push-Pull-Dynaco-A420-Tube-Amp-Schematic.htm
This is the improved Push-Pull Mullard EL34 tube amplifier circuit. The amplifier circuit shown uses the Dynaco A420 audio output transformers which have a primary impedance of 6600 ohms. the schematic is from the Dynaco Super Fidelity Output Transformers catalog. EF86 / 6CG7 / EL34 Push-Pull Tube Amp Schematic with Dynaco-A420 by Mullard
30 Watt EL34 Stereo Tube Amplifier - Kaizer Power …
https://kaizerpowerelectronics.dk/audio/2x30w-el34-tube-amplifier/
Construction in 2009. 4th January 2009. Obtained and disassembled a old Sound City 120 guitar amplfier, parts scavenged 6x El34 tubes, 5x ECC83 tubes, sockets, 120W mono output transformer, various jacks and potentiometers. 27th March 2009. Traded the 120W output transformer for 2x 30W ultra liniar output transformers. 5th May 2009.
807 Tube Audio Amplifier Schematic - hererfile
https://hererfile332.weebly.com/807-tube-audio-amplifier-schematic.html
It is a classic design of power amplifier 35 W using tube, with two EL34 in connection Push-Pull, by Siemens & Halske, with design date 03/24/1953 and code SV410 / 1. The amplifier worked from 1954 to 1989, whenever and went off, with an average lifespan of 15 hours a day.
Now you know Audio Transformer For 2x El34 Push Pull
Now that you know Audio Transformer For 2x El34 Push Pull, we suggest that you familiarize yourself with information on similar questions.
