We have collected the most relevant information on Audio Ts-590. Open the URLs, which are collected below, and you will find all the info you are interested in.
TS-590S USB Audio Setting Manual - KENWOOD
https://www.kenwood.com/i/products/info/amateur/ts_590/pdf/ts590_usb_audio_manual_e_rev1.pdf
The left side of the diagram shows the TS-590S unit while the area in the square on the right- side indicates the computer. The TS-590S and the computer are connected by a USB cable. The microphone and speakers connected to the computer are shown on the far right. Audio reception is explained first. Incoming audio from the TS-590S is sent to the
TS-590S HOWTO ssb audio setup v1.0 - G3NRW
http://www.g3nrw.net/ts-590-files/TS-590S_HOWTO_ssb_audio_setup_v1.0.pdf
The TS-590S has built-in 18-band TX equalizers that tailor the audio frequency passband over the frequency range from 0 Hz to 5100 Hz. For example, Figure 7 shows the profile of the High Boost 1 (HB1) equalizer. TX PASSBAND: Menu 30 -- HB1
TS-590S TECHNOTE ssb audio handling v1.1
http://g3nrw.net/ts-590-files/TS-590S_TECHNOTE_ssb_audio_handling_v1.1.pdf
The TS-590S can handle SSB audio that originates from a microphone, a PC or an Interface Unit (such as SignaLink). There are many types of audio signal.
TS-590SG USB Audio Setting Manual - KENWOOD
https://www.kenwood.com/i/products/info/amateur/ts_590g/pdf/ts590g_usb_audio_manual_e.pdf
TS-590SG control panel, are the method for transmitting audio input to the microphone connected to the TS-590SG, so even if thes e operations are implemented, audio entered as audio signals from USB cannot be transmitted. To transmit audio input as audio signals from the USB, select one of the following methods.
Kenwood TS-590S Audio Profiles - W1AEX
http://www.w1aex.com/ts590s/ts590s.html
that connection is established, the TS-590S will talk with any program on your computer that allows you to map the audio input and output to the USB audio input and output ports of the rig. This allows you to easily configure the usual digital communication programs used by hams without the need for any hardware between the
Kenwood TS-590SG Audio Setup - CCDX
http://www.ccdx.org/zedyx/590Audio/TS590Audio.htm
The Kenwood TS-590SG is a very sophisticated radio for it's price range. The DSP filtering is spectacular in my opinion, and it's over-all flexibility is outstanding. One thing that I noticed right off the bat, was that the AM mode is limited to only 25 watts, which I thought was odd, to say the least, given that 6m is a full 100.
[email protected] | Help with Transmitting Audio with TS ...
https://groups.io/g/TS-590/topic/help_with_transmitting_audio/28684178
- The TS-590SG Menu settings for audio are: 69 Acc2 70 rERr for sending PTT 71 4 audio level input USB 72 4 audio level output USB 73 4 audio level of ACC2 input 74 4 audio level of ACC2 output 76 ON data input VOX I am open to any suggestions on how to send audio via the USB port to the TS-590SG 73 Richard AA5VU More Richard Kriss <aa5vu@...>
KENWOOD USB Audio Controller ARUA-10
https://www.kenwood.com/i/products/info/amateur/ts_590/arua10_e.html
KENWOOD USB Audio Controller. ARUA-10 Version 4.00. Last updated : August 30, 2018. About this software. This is the software to be used to connect a TS-990S, a TS-890S, a TS-590SG, or a TS-590S transceiver and a PC by a USB cable and make it possible to use a speaker and a microphone on your PC instead of those on the transceiver.
Kenwood 590 EQ Settings | ON THE SQUID
https://onthesquid.com/2013/01/kenwood-590-eq-settings/
Kenwood 590 EQ Réglages The Kenwood TS-590S EQ settings will give the user optimum TX audio if properly configured. This transceiver is hard to beat for the money. Some will use the default mode, while others take the benefit of the ARCP-590 software. Follow this and you will have sparkle and articulation. TX EQ Settings (1) +1 (2) -6 (3) -6 (4) 0
AUDIO590 – The G3NRW TS-590 Family Resources Page
http://g3nrw.net/TS-590/?page_id=386
Audio590 is a compact stand-alone program (around 135 kB) that runs under any version of Windows XP, Windows 7 and Windows 8. The program handles the management of audio and audio-related information for USB and LSB transmission and reception (later versions will support AM and FM as well). The program does not support CW or FSK modes.
Now you know Audio Ts-590
Now that you know Audio Ts-590, we suggest that you familiarize yourself with information on similar questions.
