We have collected the most relevant information on Audiocodes 2 Stage Dialing. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Mediant 800, v6.6 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_Mediant_800,_v6.6_and_higher
When two-stage dialing is enabled, the gateway seizes one of the PSTN/PBX lines without performing any dialing, connects the AlphaCom station to the PSTN/PBX, and all further signaling (dialing and Call Progress Tones) is performed directly with the PBX without the gateway's intervention. When one-stage dialing is enabled, the gateway seizes one of the available lines, …
Connecting with AudioCodes MP-114 – Interoperability
https://docs.brekeke.com/interop/connecting-with-audiocodes-mp-114
Select “By Dest Phone Number” when you use FXS gateway and two stage dialing; Select “Descending” when you use one stage dialing. 3. One Stage or two stage dialing. 3.1 One Stage Dialing The image below shows the settings for One-Stage Dialing. To make a call: Dial PSTN phone number of the destination. 3.2 Two Stage Dialing
AudioCodes MP114/118, v6.2 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_MP114/118,_v6.2_and_higher
When two-stage dialing is enabled, the gateway seizes one of the PSTN/PBX lines without performing any dialing, connects the AlphaCom station to the PSTN/PBX, and all further signaling (dialing and Call Progress Tones) is performed directly with the PBX without the gateway's intervention. When one-stage dialing is enabled, the gateway seizes one of the available lines, …
CPE Troubleshooting Guide - AudioCodes
https://www.audiocodes.com/media/10408/ltrt-57601-cpe-sip-troubleshooting-guide.pdf
4.1.5 Advanced IP-to-Tel Troubleshooting for FXO Interfaces (2-Stage Dialing) ..... 27 4.2 How Do I Troubleshoot Tel-to-IP Call Setup ... your network environment in which AudioCodes' VoIP gateway (hereafter referred to as device) is deployed.
MP-11x and MP-124 SIP User's Manual Ver. 6 - …
https://www.audiocodes.com/media/13280/mp-11x-and-mp-124-sip-users-manual-ver-66.pdf
User's Manual AudioCodes Analog Media Gateways MediaPack™ Series MP-11x & MP-124 Analog VoIP Gateways Version 6.6
Substations calling external telephone(s) - Zenitel Wiki
https://wiki.zenitel.com/wiki/Substations_calling_external_telephone(s)
2 Configure the Call Button of the substation; 3 Configure the Prefix Number; 4 Set SIP Gateway in One Stage dialing mode. 4.1 GSM Gateway MV370; 4.2 AudioCodes MP114/118; 5 Call queuing; 6 Calling multiple numbers in sequence. 6.1 Example 1 - Call two different phone numbers in sequence; 6.2 Example 2 - Call intercom station, then two different phone numbers in sequence.
Now you know Audiocodes 2 Stage Dialing
Now that you know Audiocodes 2 Stage Dialing, we suggest that you familiarize yourself with information on similar questions.
