We have collected the most relevant information on Audiocodes Disconnect Supervision. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Disconnect problems ?? Any Input …
https://www.3cx.com/community/threads/audiocodes-disconnect-problems-any-input-appreciated.3425/
In the Audiocodes FXO , under advanced paramters : general paramters : dissconnect and answer supervision : Enable polarity reversal : enable Enable current disconnect : enable disconnect on broken connection : yes disconnect on broken connection : yes broken Connection Timeout [100 msec] : 100 Disconnect Call on Silence Detection : yes
'[asterisk-users] Audiocodes - Disconnect Supervision' - …
https://marc.info/?l=asterisk-users&m=123422130708384
When an outbound call is made= and the remote party hangs up, the Audiocodes hangs up the call immediatel= y. But if an incoming call is received and the remote party hangs up, the A= udiocodes does not hang up immediately. I have tinkered with Current Disconnect and Polarity Reversal settings, to = no avail.
Current Disconnect Issues with Audiocodes Mediant 1000 and ...
https://blog.enablingtechcorp.com/current-disconnect-issues-with-audiocodes-mediant-1000-and-single-button-emergency-devices
When working with AudioCodes Mediant 1000 FXS modules and single button emergency devices, the device was not able to detect the on hook provided by the Mediant 1000 during a far end disconnect situation. However, Audiocodes FXS Media Packs could.
IP-based Voice Mail - AudioCodes
https://www.audiocodes.com/media/10451/ltrt-66515-ip-based-voice-mail-configuration-note-ver-70.pdf
PBX Disconnect Supervision: detected by several methods: current disconnect (FXO), Busy/Reorder tones, and DTMF Code or Silence detection. After Disconnect detection, the gateway terminates its session with the PBX and VM. Outgoing Call: call to PBX subscriber, initiated by VM. 1.2 Supported Products
IP Voice Mail Configuration Guide - AudioCodes
https://www.audiocodes.com/media/10450/ltrt-66514-ip-voice-mail-configuration-guide-ver-68.pdf
PBX Disconnect Supervision: detected by several methods: current disconnect (FXO), Busy/Reorder tones, and DTMF Code or Silence detection. After Disconnect detection, the gateway terminates its session with the PBX and VM. Outgoing Call: call to PBX subscriber, initiated by VM.
Now you know Audiocodes Disconnect Supervision
Now that you know Audiocodes Disconnect Supervision, we suggest that you familiarize yourself with information on similar questions.
