We have collected the most relevant information on Audiocodes Dscp. Open the URLs, which are collected below, and you will find all the info you are interested in.
Understanding Quality of Service (QoS) - AudioCodes
https://www.audiocodes.com/media/13567/audiocodes-quick-reference-guide-understanding-quality-of-service.pdf
mark QoS in voice or video applications are Class of Service (CoS) and Differentiated Services Code Point (DSCP). CoS will mark a data stream in the layer 2 frame header while DSCP will mark a data stream in the layer 3 packet header. Various applications can be marked differently, which allows the network equipment to be able to
AudioCodes Mediant 5G Router Datasheet
https://www.audiocodes.com/media/d11of4qe/audiocodes-mediant-router-5g.pdf
AudioCodes CPE & Access Gateway Products Mediant 5G Router PRELIMINARY DATASHEET. Quality of Service • IEEE 802.1P, DSCP, TOS, DiffServ labeling, WRED, • Marking, policing, and shaping, class-based queuing with prioritization, queuing based on VLAN Security Voice Security - …
Interaction Administrator Help - SIP audio settings
https://help.genesys.com/pureconnect/mergedprojects/wh_ia/desktop/sip_audio_settings1.htm
Note: The values 100, 102-105 should not be used for AudioCodes. 101. RTP DSCP Value. This option sets the Differentiated Services Code Point (DSCP) value of Quality of Service (QoS) in transmitted RTP packets. The values are shown in both hex (00..3F) and related decimal (0..63) formats. Some values are also identified by the binary format, CS6.
AudioCodes 440HD settings - Genesys Cloud Resource …
https://help.mypurecloud.com/articles/audiocodes-440hd-settings/
DSCP: Use the list to choose the Differentiated Services Code Point (DSCP) value of Quality of Service (QoS). The system places this value in the upper 6 bits of the TOS (Type Of Service) field. The TOS field is in the IP header of every SIP packet. The range of values available is 00 (0,000000) through 3F (63, 111111).
6.40A – AudioCodes Mediant 800 MSBG - Genesys
https://testlab.genesys.com/compatibilityfiles/documents/Audiocodes%20Mediant%20800%20MSBG%20v6.4.pdf
AudioCodes Mediant 800 MSBG Page 1 of 66 Installation and Configuration Guide Initial Setup - Network Settings 6.40A – AudioCodes Mediant 800 MSBG 1. ... Differences in DSCP from one network to another b. If one network uses SRTP and another uses RTP if Media Security is Enabled c. If one network uses T.38 Relay and another does not
Now you know Audiocodes Dscp
Now that you know Audiocodes Dscp, we suggest that you familiarize yourself with information on similar questions.
