We have collected the most relevant information on Audiocodes Dtmf Duration. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Quick Reference Guide
https://www.audiocodes.com/media/14274/audiocodes-quick-reference-guide-voice-quality-troubleshooting-for-session-border-controllers-sbcs-and-gateways.pdf
The range of valid DTMF is from 0 to -36 dBm0 (must accept); lower than -55 dBm0 must be rejected (TR-TSY-000181, ITU-T Q.24A). Thus, larger values denote lower volume. This value is defined only for DTMF digits. For other events, it is set to zero by the sender and is ignored by the receiver. duration: Duration of this digit, in timestamp units.
Speech customization - techdocs.audiocodes.com
https://techdocs.audiocodes.com/voice-ai-connect/Content/VAIG_Combined/speech_customization.htm
When it detects silence for a user-defined duration or a configured DTMF key (e.g., the # pound key) is pressed by the user, it concatenates the multiple speech-to-text detected utterances, and then sends them as a single textual message to the bot. In this way, the user can configure a longer silence timeout.
AudioCodes MP114/118 (Edge) - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_MP114/118_(Edge)
The ‘Hotline Dial Tone Duration’ can be changed from the 'DTMF & Dialing' page item (Configuration tab > VoIP menu > GW and IP to IP submenu > DTMF and Supplementary submenu > DTMF & Dialing page item). Display the Navigation Tree in Full View. The default value is 16 seconds. Caller ID
Using CAS Protocol Tables - AudioCodes
https://www.audiocodes.com/media/9883/ltrt-28612-cas-protocol-table-configuration-note.pdf
AudioCodes, AC, AudioCoded, Ardito, CTI2, CTI², CTI Squared, HD VoIP, HD VoIP ... time for the DTMF digits generated ... for metering pulse timer duration. INIT_PULSE_DIAL_ADDITIONAL_PARAMS. Not used. INIT_RINGING_TO_ANALOGUE . When using analogue gateway option, it defines the
AudioCodes MP114/118, v4.8 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_MP114/118,_v4.8_and_higher
The Hotline Dial Tone Duration can be changed. The default value is 16 seconds. (Protocol Management > Protocol Definition > DTMF & Dialing > Hotline Dial Tone Duration'). Caller ID. Use the Caller Display Information table to send display information to the intercom station that receives the call. (Protocol Management > Endpoint Settings > Caller ID).
Now you know Audiocodes Dtmf Duration
Now that you know Audiocodes Dtmf Duration, we suggest that you familiarize yourself with information on similar questions.
