We have collected the most relevant information on Audiocodes Enable Current Disconnect. Open the URLs, which are collected below, and you will find all the info you are interested in.
Current Disconnect Issues with Audiocodes Mediant 1000 and ...
https://blog.enablingtechcorp.com/current-disconnect-issues-with-audiocodes-mediant-1000-and-single-button-emergency-devices
To do this, you must access the Mediant 1000’s “AdminPage” and select the “ini parameters” option, enter “currentdisconnectduration” in the “Parameter Name” field, and enter “500” in the “Enter Value” field. TIP: Before you enter the value, you can click on “Apply New Value” just see what it is currently set at. The default value is “900”.
AudioCodes Disconnect problems ?? Any Input …
https://www.3cx.com/community/threads/audiocodes-disconnect-problems-any-input-appreciated.3425/
In the Audiocodes FXO , under advanced paramters : general paramters : dissconnect and answer supervision : Enable polarity reversal : enable Enable current disconnect : enable disconnect on broken connection : yes disconnect on broken connection : yes broken Connection Timeout [100 msec] : 100 Disconnect Call on Silence Detection : yes
AudioCodes MP114/118, v4.8 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_MP114/118,_v4.8_and_higher
Open the General Parameters screen (Protocol Management > Advanced Parameters > General Parameters) and enable the relevant detection method. Note: In the UK, if you are using BT and are having problems with AudioCodes not detecting current disconnect hangups, your PSTN line might have the wrong specifications for the AudioCodes to detect hangups.
AudioCodes MP114/118 (Edge) - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_MP114/118_(Edge)
Contact BT and ask what the current DCT (Disconnect Clear Time) setting is for your phone line. It should be around 800ms. If this is the case, you also need to adjust the DCT setting on the AudioCodes as the default value is 900ms. Add this parameter to the .ini config file: CURRENTDISCONNECTDURATION = 800
Now you know Audiocodes Enable Current Disconnect
Now that you know Audiocodes Enable Current Disconnect, we suggest that you familiarize yourself with information on similar questions.
