We have collected the most relevant information on Audiocodes Failed Calls Due To No Route. Open the URLs, which are collected below, and you will find all the info you are interested in.
Failover or Alternative Routing with Audiocodes SBC
https://www.mirazon.com/failover-or-alternative-routing-with-audiocodes-sbc/#:~:text=In%20general%2C%20for%20something%20to%20fail%20and%20need,do%20afterward%20to%20get%20this%20all%20working%20properly.
AudioCodes Quick Reference Guide – Outbound Calls …
https://www.audiocodes.com/media/13632/audiocodes-quick-reference-guide-outbound-calls-not-working.pdf
First, we need to determine where the call is failing. Is it failing at the AudioCodes SBC, the PBX or on the Carrier side? To find this we will use the AudioCodes Syslog Viewer Application to diagnose issues with the call. Open Syslog Viewer and make a test call to see if the call is reaching the SBC. If you do not see any
Inbound Calls Not Working - AudioCodes
https://www.audiocodes.com/media/13631/audiocodes-quick-reference-guide-inbound-calls-not-working.pdf
First, we need to determine where the call is failing. Is it failing at the AudioCodes SBC, the PBX or on the Carrier side? To find this we will use the AudioCodes Syslog Viewer Application to diagnose issues with the call. Open Syslog Viewer and make a test call to see if the call is reaching the SBC. If you do not see any
Failover or Alternative Routing with Audiocodes SBC
https://www.mirazon.com/failover-or-alternative-routing-with-audiocodes-sbc/
In general, for something to fail and need an alternate route, you probably get one of three SIP responses back: 500, 503 or 487. There are more options, but those are typically the ones you get. And you need to tell AudioCodes what to listen for and then what to do afterward to get this all working properly.
Paging from Lync through AudioCodes gateway - VoIP Forum ...
https://community.spiceworks.com/topic/1957897-paging-from-lync-through-audiocodes-gateway
The issue was the paging system was not putting the FXO port in an idle state so the AudioCodes would return a 404 not found when trying to route to the call to port as it seem the port as down. 0 This topic has been locked by an administrator and is …
Now you know Audiocodes Failed Calls Due To No Route
Now that you know Audiocodes Failed Calls Due To No Route, we suggest that you familiarize yourself with information on similar questions.
