We have collected the most relevant information on Audiocodes Modem Bypass. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes, Avaya, Media Bypass, and BackToBackBypass ...
https://techcommunity.microsoft.com/t5/microsoft-teams/audiocodes-avaya-media-bypass-and-backtobackbypass-offer-was/m-p/1199019
When toggling ICE Lite on for the AudioCodes, and turning on Media Bypass in Teams, all is well except calls from Avaya to Teams. Audio on the Avaya side drops after about 3 seconds, so the Teams recipient can hear the Avaya side for 3 seconds before dead air. Audio in the other direction is fine.
Setting up faxing (AudioCodes MP1288) – Zoom Support
https://support.zoom.us/hc/en-us/articles/360056856411-Setting-up-faxing-AudioCodes-MP1288-
Fax/Modem Bypass Coder Type: G711Ulaw or G711Alaw, depending on region In the left-side navigation panel, click CODERS & PROFILES then Coder Groups. Verify the Coder Group Name at the top is set to AudioCodersGroup_0 has the below coders listed. Create a new Coder Group named AudioCodersGroup_1 with the below codes.
Setting up faxing (AudioCodes MP1XX series) – Zoom Support
https://support.zoom.us/hc/en-us/articles/360052771292-Setting-up-faxing-AudioCodes-MP1XX-series-
How to set up faxing on an AudioCodes MP1XX series gateway. Sign in to MP1XX ATA web interface. Navigate to Configuration > VoIP > Media > Fax/Modem/CID Settings. Confirm that Fax/Modem Bypass Coder Type is set to G711Ulaw or G711Alaw, depending on region. Click Submit for the parameters to take effect to the device.
Fax & Modem Transport Modes
https://xa0t3k.me/files/audiocodes/Documentation/faq_Audiocodes_AppNote_Fax.pdf
In this configuration, both T.30 and V.34 faxes work in Bypass mode. Or FaxTransportMode = 1 (Relay) V34ModemTransportType = 2 (Modem bypass) V32ModemTransportType = 2 V23ModemTransportType = 2 V22ModemTransportType = 2 In this configuration, T.30 fax uses T.38 Relay mode while V.34 fax uses Bypass mode. Using Relay mode for both T.30 and V.34 …
Configuration Note - AudioCodes
https://www.audiocodes.com/media/9679/ltrt-12620-mediant-sbc-for-sunrise-sip-trunk-with-microsoft-skype-for-business-2015-configuration-note.pdf
AudioCodes Professional Services - Interoperability Lab . ... Internet. Configuration Note 2. Component Information Version 7.0 11 AudioCodes Mediant SBC ... (Media Bypass) supports G.722, G.711A-law and G.711U-law coders Sunrise SIP …
User’s Manual - AudioCodes
https://www.audiocodes.com/media/10471/ltrt-83310-mediant-600-and-mediant-1000-sip-users-manual-v64.pdf
Mediant™ 600 & Mediant™ 1000 VoIP Media Gateways SIP Protocol User’s Manual Version 6.4 March 2012 Document # LTRT-83310
Optical Fiber Bypass Units - alvasta-tech.com
https://www.alvasta-tech.com/optical-fiber-bypass-unit
Moxa’s fiber bypass units add bypass relay functionality to any network node, whether it is in a linear or collapsed ring topology. When a power outage occurs, the optical fiber bypass units bypass the inactive switch, which allows the network to keep functioning normally. Optical Fiber Bypass Unit Optical Fiber Bypass Units OBU-102 Series
HOWTO: Setup an Audiocodes Mediant 500L with Zetafax
https://www.equisys.com/Support/Technotes/howto-setup-an-audiocodes-mediant-500l-with-zetafax
To Configure the Fax and modem parameters: 1. Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media submenu > Fax/Modem/CID Settings). 2. In the ‘General Settings’ section, from the Fax Transport Mode dropdown list, select T.38 Relay 3. From the V.22 Modem Transport Type dropdown list, select Enable bypass 4.
Now you know Audiocodes Modem Bypass
Now that you know Audiocodes Modem Bypass, we suggest that you familiarize yourself with information on similar questions.
