We have collected the most relevant information on Audiocodes No Route. Open the URLs, which are collected below, and you will find all the info you are interested in.
Failover or Alternative Routing with Audiocodes SBC
https://www.mirazon.com/failover-or-alternative-routing-with-audiocodes-sbc/
In general, for something to fail and need an alternate route, you probably get one of three SIP responses back: 500, 503 or 487. There are more options, but those are typically the ones you get. And you need to tell AudioCodes what to listen for and then what to do afterward to get this all working properly.
AudioCodes Quick Reference Guide – Outbound Calls …
https://www.audiocodes.com/media/13632/audiocodes-quick-reference-guide-outbound-calls-not-working.pdf
INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED TO THE BEST OF AUDIOCODES KNOWLEDGE, AND AUDIOCODES SHALL NOT BE HELD LIABLE FOR ANY INACCURACIES. Quick Reference Guide AudioCodes Quick Reference Guide Outbound Calls Not Working ... Check the IP 2 IP routing table to make sure there is an appropriate route for the call to traverse the SBC
Configure Failover Routing with AudioCodes Media Gateways ...
https://techcommunity.microsoft.com/t5/skype-for-business-blog/configure-failover-routing-with-audiocodes-media-gateways-part-3/ba-p/620179
After the Proxy Sets are defined, define the IP Group that references Proxy Group 1 (the Lync Server Mediation pool). Routes use IP Groups to route calls to the appropriate Proxy Set (see Figure 4). 1. Click the Configuration navigation tab. 2. Select VoIP –> Control Network –> IP Group Table . 3.
Inbound Calls Not Working - AudioCodes
https://www.audiocodes.com/media/13631/audiocodes-quick-reference-guide-inbound-calls-not-working.pdf
INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED TO THE BEST OF AUDIOCODES KNOWLEDGE, AND AUDIOCODES SHALL NOT BE HELD LIABLE FOR ANY INACCURACIES. Quick Reference Guide AudioCodes Quick Reference Guide Inbound Calls Not Working. ... Check the IP 2 IP routing table to make sure there is an appropriate route for the call to traverse the SBC
One way audio with Microsoft Direct Routing ... - the UC …
https://www.ucguys.com/2018/08/one-way-audio-with-microsoft-direct-routing-with-audiocodes-mediant-sbc-when-using-a-nat.html
In a recent implementation of Teams Direct Routing, my customer was experiencing one way audio for inbound calls from the PSTN. In this case the Teams user receiving the call could not hear any audio from the PSTN caller. In this particular scenario, the customer was piloting Teams Direct Routing with a new certified AudioCodes Mediant 4000 SBC. In looking at the call traces, …
Now you know Audiocodes No Route
Now that you know Audiocodes No Route, we suggest that you familiarize yourself with information on similar questions.
