We have collected the most relevant information on Audiocodes Trunk Group Table. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Mediant™ Gateways
https://www.audiocodes.com/media/10248/ltrt-39240-configuration-note-mediant-gateways-with-pbx-t1-and-bell-canada-sip-trunk.pdf
AudioCodes Media Gateways 4 Document #: LTRT-39240 List of Figures ... To configure a Trunk Group: 1. Open the 'Trunk Group Table' page (Configuration tab > VoIP menu > Gateway and IP to IP sub-menu >Trunk Group > Trunk Group). Figure 3-4: Trunk Group Table Page 2.
AudioCodes 4.6 FXO Gateway - Manual Config - sipXecs ...
https://sipfoundry.atlassian.net/wiki/spaces/sipXecs/pages/492006/AudioCodes+4.6+FXO+Gateway+-+Manual+Config
Trunk Group Settings. The Trunk Group Settings Table is used to determine the method in which new calls are assigned to B-channels within each trunk group. Network Settings. IP Address: IP address of the AudioCodes gateway. Channel Settings. You should not need to modify any channel settings for sipX interoperability. Trunk Settings. The Trunk ...
Configure Failover Routing with AudioCodes Media Gateways ...
https://techcommunity.microsoft.com/t5/skype-for-business-blog/configure-failover-routing-with-audiocodes-media-gateways-part-4/ba-p/620190
To configure calls from Lync Server to the PSTN/PBX use the IP to Trunk Group routing table. Select VoIP –> GW and IP to IP –> Routing –> IP to Trunk Group Routing. Figure 7 shows a simple configuration in which all calls received by the Media Gateway are sent to the PSTN trunks located in Trunk Group 1.
Connecting AudioCodes SBC to Microsoft Teams …
https://www.audiocodes.com/media/13253/connecting-audiocodes-sbc-to-microsoft-teams-direct-routing-enterprise-model-configuration-note.pdf
Remote REFER Mode and Remote 3xx Mode), Added Table “Configuration Example: SIP Trunk IP Profile (toward Remote SBC)”, Changed title for Table “Configuration Example: Teams IP Profile (through the Proxy SBC) and Table “Configuration Example: SIP Trunk IP Profile (toward SIP Provider/ Media Gateway)”. 13321
HOWTO: Setup an Audiocodes Mediant 500L with Zetafax
https://www.equisys.com/Support/Technotes/howto-setup-an-audiocodes-mediant-500l-with-zetafax
1. Open the Trunk Group Table page (Configuration tab > VOIP menu > Gateway submenu > Trunk Group > Trunk Group. 2. Configure the Trunk Group ID #1 (as shown in the figure below): · From the ‘From Trunk’ and ‘To Trunk’ drop down lists, select 1 to indicate Trunk 1 for this trunk Group · In the ‘Channels’ fields, enter the Trunk ...
SBC Configuration Examples for Mediant SBC - …
https://www.audiocodes.com/media/9961/ltrt-31626-mediant-sbc-configuration-examples-ver-72.pdf
Represents a SIP entity with which the SBC receives and sends calls. This can be a server (e.g., IP PBX or ITSP) or it can be a group of users (e.g., LAN IP phones).
Now you know Audiocodes Trunk Group Table
Now that you know Audiocodes Trunk Group Table, we suggest that you familiarize yourself with information on similar questions.
