We have collected the most relevant information on Audiocodes Trunk Group. Open the URLs, which are collected below, and you will find all the info you are interested in.
AudioCodes Mediant™ Gateways
https://www.audiocodes.com/media/10248/ltrt-39240-configuration-note-mediant-gateways-with-pbx-t1-and-bell-canada-sip-trunk.pdf
To configure a Trunk Group: 1. Open the 'Trunk Group Table' page (Configuration tab > VoIP menu > Gateway and IP to IP sub-menu >Trunk Group > Trunk Group). Figure 3-4: Trunk Group Table Page 2. In the 'Module' column, select he module type (i.e., PRI) for which you t wish to configure the Trunk Group. 3.
SBC Configuration Examples for Mediant SBC - …
https://www.audiocodes.com/media/9961/ltrt-31626-mediant-sbc-configuration-examples-ver-72.pdf
Represents a SIP entity with which the SBC receives and sends calls. This can be a server (e.g., IP PBX or ITSP) or it can be a group of users (e.g., LAN IP phones).
Configure Failover Routing with AudioCodes Media Gateways ...
https://techcommunity.microsoft.com/t5/skype-for-business-blog/configure-failover-routing-with-audiocodes-media-gateways-part-4/ba-p/620190
Select VoIP –> PSTN –> Trunk Settings . At the top of the Trunk Settings pane there is a status indicator for each PSTN trunk port configured on the Media Gateway (see Figure 2). This guide does not detail the configuration of PSTN trunks for …
Application Notes for AudioCodes MediaPack 11x with Avaya ...
https://www.devconnectprogram.com/fileMedia/download/fcd19bc6-8f22-4da3-ba57-3d7d84972e75
AudioCodes MediaPack (MP) 11x Analog VoIP gateways provide voice technology to connect analog phones, fax machines and modems (FXS) or landlines (FXO) to IP based PBX systems. During compliance testing, AudioCodes MP-112 and AudioCodes MP-114 VoIP gateways were used. Inherently, this also covers AudioCodes MP-118. Both AudioCodes MPs were ...
AudioCodes Mediant 1000 Configuration - Altigen
https://know.altigen.com/attachments/1266/AudioCodes-Mediant1000.pdf
AudioCodes Mediant 1000 Configuration Guide for MAXCS 8.5 Page 3 of 27 About This Guide ... Set VoIP Trunk Group Parameters Configure VoIP Trunk group settings. 1. Choose VoIP > GW and IP to IP > Trunk Group > Trunk Group. 2. For each trunk group, set these parameters:
AudioCodes Mediant 1000 Configuration Guide
https://know.altigen.com/attachments/1113/AudioCodes_Mediant1000_MaxCS7.pdf
Mediant™ 1000B Mediant™ 800 SIP Protocol Deployment Note Deploying AudioCodes Mediant™ 1000B / 800 with AltiGen® MAX Communications Server 7.0 . December 2014 . Document #: LTRT-
Audiocodes Gateway Setup
https://help.genesys.com/pureconnect/mergedprojects/wh_tr/mergedprojects/wh_tr_managed_phones/desktop/managed_ip_phones_ag_files/audiocodessetup_6.4.pdf
18. On Mediant, go to Configuration > VOIP > GW and IP to IP > Trunk Group > Trunk Group a. Select the Module number and the trunk number from the drop down list. It is recommended to configure one trunk per line/Group Index so select From Trunk “1” To Trunk “1” on the first line. a. Specify Channels “1-23” for one or more ISDN PRI ...
Now you know Audiocodes Trunk Group
Now that you know Audiocodes Trunk Group, we suggest that you familiarize yourself with information on similar questions.
