We have collected the most relevant information on Audioengine A2 Subwoofer Crossover. Open the URLs, which are collected below, and you will find all the info you are interested in.
Crossover A2 with subwoofer? | Headphone Reviews and ...
https://www.head-fi.org/threads/crossover-a2-with-subwoofer.684167/
So the A2 has a frequency response of 65Hz - 22kHz +/-2.0dB Is it still a good idea to have some sort of crossover / high level limiter to split high level signal to A2 and low level signal to the subs? The subs itself has a low level limiter for input but it doesn't have a high level output back to the A2
Top 10 Best Subwoofers for AudioEngine A2 in 2022
https://easytopten.com/subwoofers-for-audioengine-a2/
FEATURES: Analog class A/B power amplifiers, dual analog audio inputs for connecting multiple devices, USB audio input, and Bluetooth aptX.The A2+ features true stereo sound, a subwoofer audio output, custom aramid fiber woofers and silk dome tweeters, and a power-saving idle mode. All cables are included and it works with Mac or PC out of the box.
Audioengine A2 crossover (burnt) | diyAudio
https://www.diyaudio.com/community/threads/audioengine-a2-crossover-burnt.296683/
As the passive speaker failed I just thought of the crossover, and in fact, they smell quite bad, like if they were burnt. both of them (R & L) so I guess my only change is to replace both 2 way crossover PCB with new ones. There comes the tricky part for me, which ones should I pick for these Audioengine A2?
What should I set the subwoofer crossover ... - Audioengine
https://support.audioengineusa.com/hc/en-us/articles/360034025132-What-should-I-set-the-subwoofer-crossover-phase-to-with-my-setup-
The crossover will depend on the individual size and shape of the room, placement of the sub in that room, and even personal preference. I usually recommend starting with the Crossover all the way counter clockwise. Get the Volume close to where you think it should be for starters.
Bass Management/ high pass crossover with …
https://audiophilestyle.com/forums/topic/14466-bass-management-high-pass-crossover-with-audioengine-a2s-and-subwoofer/
As currently configured, the PSW10 is running from the A2's via the 3.5 mm input/output jack into the RCA's with a y-cable. The DAC is attached via RCA's. Configured as such the A2's are running full range, and even with the sub crossover turned all the way down to 80 hz, the bass is a little muddy in certain areas where the frequencies overlap.
AudioEngine A2+ Review - NO Audiophile
http://noaudiophile.com/AudioEngine_A2_Plus/
AudioEngine A2+ Review. These speakers are small. Component Overview: Tweeter. ... Crossover. Getting the poly fill out of the way we can see that there is in fact a passive crossover attached to a tiny little brace..The crossover has 2 coils, 2 caps, and one resistor. I'm guessing that it's a second order crossover for both the tweeter and ...
Now you know Audioengine A2 Subwoofer Crossover
Now that you know Audioengine A2 Subwoofer Crossover, we suggest that you familiarize yourself with information on similar questions.
