Audiolab 8000a Phono Sockets | Audio-Digital.net

We have collected the most relevant information on Audiolab 8000a Phono Sockets. Open the URLs, which are collected below, and you will find all the info you are interested in.

Audiolab 8000A | AVForums

https://www.avforums.com/threads/audiolab-8000a.885100/

The Pro Signal PSG01551 does not fit the newer 8000A's with 6 inputs. In order to fit the extra phono sockets they went from fairly easy to obtain 18x14mm sockets to the 14x14mm grid - these are much harder to obtain (i.e impossible) They are, apparently, available from IAG but at quite a price.

Separating the Pre and Power Sections on an Audiolab 8000A

http://www.hi-fi-insight.com/separating-the-pre-and-power-sections-on-an-audiolab-8000a.html

Well firstly most Audiolab amps already come with separate phono sockets for pre-out and power-in, so it is usually just a question of removing some links or swapping a couple of resistors. The Audiolab 8000A has been revised a number of times so there are various circuit board layouts in existence but the principle remains the same.

Audiolab 8000A 60W Stereo Integrated Amplifier Manual ...

https://www.hifiengine.com/manual_library/audiolab/8000a.shtml

Quality well designed amp with a good phono stage. These have been in production through the 80's and until 97 when Audiolab was bought by TAG McLaren. My one was a mid 90's model and easily outstripped the NAD 3130 it replaced. Sound is dynamic and punchy although the high end can get harsh, but only if pushed too hard.

Audiolab 8000A Amplifiers user reviews : 4.4 out of 5 - 37 ...

http://www.audioreview.com/product/amplification/amplifiers/audiolab/8000a.html

Having owned the Audiolab 8000A series III for a number of years I can give, I hope, a reasonably accurate account of it. I bought it at the time for its accuracy - being partnered with a mildly warm Philips CD850 and mildly forward Tannoy 613's. In reality, it is mildly coloured. Mid range is slightly forward and hi treble is rolled back.

Audiolab 8000A PS caps upgrade | diyAudio

https://www.diyaudio.com/community/threads/audiolab-8000a-ps-caps-upgrade.343269/

Audiolab 8000A PS caps upgrade. I've just replaced the power supply caps in my Audiolab 8000A, and I thought people might be interested in my experience. I'd had the amp in storage for a few years, and when I got it out to set up again I found the RCA sockets had started to break as the plastic bodies crumbled - a common problem.

Now you know Audiolab 8000a Phono Sockets