We have collected the most relevant information on Audiolab 8000a Specs. Open the URLs, which are collected below, and you will find all the info you are interested in.
Best Speakers for Audiolab 8000A – A Hifi Enthusiast
https://www.paarc.org/best-speakers-for-audiolab-8000a/#:~:text=Audiolab%208000A%20Specifications.%201%20Power%20Outputs%3A%2060%20Watts,2.9%E2%80%B3%20x%2013.2%E2%80%B3%29%208%20Weight%3A%207.6kg%20%2816.8lbs%29%20
Audiolab 8000A 60W Stereo Integrated Amplifier Manual ...
https://www.hifiengine.com/manual_library/audiolab/8000a.shtml
Audiolab 8000A. Specifications. Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz. Total harmonic distortion: 0.05%. Downloads. Reviews. Comments.
Audiolab 8000A integrated amplifier. Free data sheet by GB ...
http://www.gbaudio.co.uk/data/8000a.htm
Audiolab 8000A Integrated Amplifier Specifications. Power output: 60 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 0.11mV (MC), 2mV (MM), 100mV (line) Signal to noise ratio: 75dB (MC), 78dB (MM), 80dB (line) Channel separation: 60dB (line) Output: 100mV (line), 0.7V (Pre out)
Audiolab 8000A Integrated Amplifier (April 1988)
https://www.gammaelectronics.xyz/audio_04-1988_audiolab.html
Manufacturer's Specifications: Power Output: 50 watts per channel, 20 Hz to 20 kHz, both channels driven into 8-ohm loads. Rated THD: 0.05%. Rated IHF IM: 0.05%. Frequency Response: Phono, RIAA/IEC, 20 Hz to 20 kHz, ±0.5 dB. High level, 20 Hz to 20 kHz, ±0.5 dB; 2 Hz to 65 kHz, +0,-3 dB.
Best Speakers for Audiolab 8000A – A Hifi Enthusiast
https://www.paarc.org/best-speakers-for-audiolab-8000a/
Audiolab 8000A Specifications Power Outputs: 60 Watts per channel into 8 Ohms Total Harmonic Distortion: 0.05% Frequency Response: 20Hz-20kHz Speaker Load Impedance: 4 Ohms to 16 Ohms Inputs: 1 MM Phono input, 1 MC Phono input, 2 Tape inputs, 4 Line inputs Outputs: Preamp output, Headphone output, 2 ...
Audiolab 8000A/8000P Amplifier review and test
http://www.hifi-review.com/150541-audiolab-8000a-8000p.html
Audiolab 8000A/8000P Amplifier. This pair of the British amplifiers was not quite "correct" two-block amplifier. And if in reality 8000P is a power amp, the "preamp" 8000A is a complete integrated amplifier which acts in this configuration as a preliminary one. And it copes with this task quite successfully as 8000A has the output of pre-amp for connection of internal power …
Audiolab 8000A Amplifiers user reviews : 4.4 out of 5 - 37 ...
http://www.audioreview.com/product/amplification/amplifiers/audiolab/8000a.html
Previousely is using Monster XP speaker cable n a germany made interconnect – where the system is too bright and lack of bass (improved after using QED) System had been tested on the 8000A: A) NAD C521BEE CD player Monitor Audio Bronze 3 speaker Chord cobra 2 interconect & Transparent 14.4hp speaker cable (bi-wire) B) Shanling T-80 (tube) CD player AE 1 speaker …
Audiolab 8000a - Aug 21 - Retrotech Audio - Vintage Audio
http://www.retrotechaudio.co.uk/audiolab-8000a---aug-21.html
Specifications: • Power output: 60 watts per channel into 8Ω (stereo) • Frequency response: 20Hz to 20kHz • Total harmonic distortion: 0.05% • Input sensitivity: 0.11mV (MC), 2mV (MM), 100mV (line) • Signal to noise ratio: 75dB (MC), 78dB (MM), 80dB (line) • Channel separation: 60dB (line) • Output: 100mV (line), 0.7V (Pre out)
Audiolab 8000A Integrated Amplifier | WhyBuyNew
https://www.whybuynew.co.uk/consumer-hifi/hifi-separates/audiolab-8000a-intergrated-amplifier.htm
This Audiolab 8000A Integrated Amplifier comes with power cord included only. Please note that it does not include original packaging but has been professionally packaged to ensure safe delivery to your door. Specifications: Power output: 60 watts per channel into 8 ohms (stereo) Frequency response: 20Hz to 20kHz.
Audiolab 8000P Stereo Power Amplifier Manual | HiFi …
https://www.hifiengine.com/manual_library/audiolab/8000p.shtml
Input sensitivity: 1V. Signal to noise ratio: 95dB. Dimensions: 445 x 74 x 337mm. Weight: 8.7kg. Power output: 100 watts per channel into 8Ω (stereo) Frequency response: 20Hz to 20kHz. Total harmonic distortion: 0.05%. Signal to noise ratio: 95dB. Dimensions: 445 x 74 x 337mm.
6000A Specifications - Audiolab
https://www.audiolab.co.uk/6000a/
Unlike its costlier, analogue-only sibling, it incorporates high-quality D/A conversion, enabling ...
Now you know Audiolab 8000a Specs
Now that you know Audiolab 8000a Specs, we suggest that you familiarize yourself with information on similar questions.
