We have collected the most relevant information on Audiostatic Mdf. Open the URLs, which are collected below, and you will find all the info you are interested in.
Audiostatic ES-100 loudspeaker | Stereophile.com
https://www.stereophile.com/content/audiostatic-es-100-loudspeaker
The Audiostatic's diaphragm is not physically segmented. As a result, it has a noticeable "drum-head" resonance at about 50Hz. The panel frame is made of 1.5"-thick MDF and is quite sturdy. A thin, conductive-plastic diaphragm just 5µm thick is sandwiched between stationary stator electrodes, these insulated wires running from top to bottom.
GESCHKA-HiFi Audiostatic
http://www.geschka-hifi.de/hifi/b_audi_en.htm
A minimal distance of approx. 0,7 m (2,2 foot) from the back walls and approx. 0,2 m (2/3 foot) from the side walls is all that is required. In larger rooms an additional Audiostatic per channel can be used to function as a woofer. Good quality amplifiers with 60 Watts per channel or more are required and recommended for best sonic results.
Audiostatic - Pure full range electrostatic loudspeakers
Audiostatic - Pure full range electrostatic loudspeakers Home Models Contact After about 40 years, Audiostatic is still one of the most innovative producers of durable full range electrostatic loudspeakers. The new MDi pure full range electrostatic loudspeaker 40 years of audio innovation
Steve's - Do It Yourself - Electrostatic Speakers ...
http://www.audiocircuit.com/DIY/Electrostatic-Speakers/Project:Rebuild-an-Audiostatic-ES-100-by-Sean-Bowes
The MDF came from a small plastic distributor in South Jersey (USA). He sold use a sheet for about $50 US dollars. He had some other sizes and thickness, but we wanted it to as exact as possible to the AudioStatic's MDF. Mylenex The Mylenex is like Mylar, and is made by Dupont. We used the #339 type.
Help, Audiostatic ES-100 | diyAudio
https://www.diyaudio.com/community/threads/help-audiostatic-es-100.130554/
I just brought a second hand Audiostatic ES-100, but both speakers have a low level volume and I can hear distortion in low frequencies. ... Can somebody guide me to take the electrostatic panel out from the frame? I have taken the bottom, upper and electronics mdf parts, but I have a problem when I tried to take both side mdf frames apart.
GESCHKA-HiFi Audiostatic
http://www.geschka-hifi.de/hifi/b_audi_de.htm
Audiostatic DCI Full Range Electrostaten lassen sich in Räumen ab etwa 15m² aufstellen und klingen selbst in akustisch kritischen Räumen oft deutlich besser als Gehäuselautsprecher. Die optimale Aufstellung der Electrostaten läßt sich durch Verschieben leicht ermitteln. Der Mindestabstand von der Rückwand sollte ~ 0,7 mtr. und von den Seitenwänden ~ 0,2
Steve's - Audiostatic Audelcon 2 - Audio Circuit
http://www.audiocircuit.com/Home-Audio/Audiostatic/Audelcon-2
Audiostatic site (April 7, 1999) The Audelcon DIY 2 and DIY 4 projects consist of a pair of completely pre-assembled and tested full range electrostatic loudspeakers, packed in a rigid carton. What we have not done is the finishing of the CNC machined MDF loudspeaker frame.
Now you know Audiostatic Mdf
Now that you know Audiostatic Mdf, we suggest that you familiarize yourself with information on similar questions.
