We have collected the most relevant information on Can I Use Rg59 For Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
RG-59/RG-6 Coaxial for Analog Audio Interconnect? | AVS …
https://www.avsforum.com/threads/rg-59-rg-6-coaxial-for-analog-audio-interconnect.1308003/
Yes, you can use any coax for analog audio. Characteristic impedance doesn't matter. Some are better than others for the purpose. Look for something with a high percentage braided shield. As far as the effects you perceived, I suspect it is all in your head.
RG-59U coax cable for audio interconnects? | Home Theater ...
https://www.hometheaterforum.com/community/threads/rg-59u-coax-cable-for-audio-interconnects.125749/
Audio signals/low frequency dont have these issues so you can use any of the popular styles of coax: 50/75/110/300. While the bulk of audio cables use 50 ohm coax, 75/RG6/RG59 coax works fine as well. Using 2 sets of component video cables would work fine for a SACD system.
What is rg59 coaxial cable used for? - AskingLot.com
https://askinglot.com/what-is-rg59-coaxial-cable-used-for
Although RG59 can be used for cable TV applications (CATV), there is a significant amount of signal loss over higher frequencies when run at longer distances. Also Know, can you use rg59 for cable TV? However, crimp and twist-on connectors can be put on RG6 cables as well but they cannot be used for satellite TV.
RG59 vs RG6 for line level audio : CommercialAV
https://www.reddit.com/r/CommercialAV/comments/4bw488/rg59_vs_rg6_for_line_level_audio/
Not to mention cost to much, but the RG6 is less than half the specialty RG59. For audio you can use almost any cable. If your connections are balanced use shielded twisted pair, for unbalanced use the cheapest coax.
Once again...RG6 vs RG59/u | Audioholics Home Theater …
https://forums.audioholics.com/forums/threads/once-again-rg6-vs-rg59-u.36608/
I would also use RG6 for digital coax audio connections. RG59 is perfectly adequate for analog video connections and subwoofers. Shielding is the main issue with analog component video, and it will be virtually identical within …
Can I use an RG59 cable for an oscilloscope? - Quora
https://www.quora.com/Can-I-use-an-RG59-cable-for-an-oscilloscope
Answer (1 of 5): If you are aren’t concerned about reflections or the frequencies are low, then “yes”. Otherwise you have issues — RG59 has a characteristic 75Ω impedance. Oscilloscopes are normally 1MΩ unless they have a switch for optional termination, which is …
Choosing the Right Video Cable - SDI - TripleWide Media
https://articles.triplewidemedia.com/choosing-right-video-cable-sdi/
SDI can use RG-59 and RG-6 cable, although RG-6 cable is necessary for long runs and preferred in general. RG-59 cable, while cheaper, is less suitable for runs much over 100’. Also, be aware that RG-59 comes in 50 Ohm and 75 Ohm versions. 75 …
Audiogon Discussion Forum
https://forum.audiogon.com/discussions/best-rg6-rca-compression-connectors-for-subwoofer-cable
Actually, a lot of audiophiles use RG59 for subwoofer cable, and R6 solid copper is an improvement over that. Blue Jeans cable makes them using the method I intend to use. This is a powered subwoofer mind you, so the signal going to the subwoofer is DIGITAL Line Out, for which RG is perfect for long runs and maintains constant 75 ohm impedance.
Using a 75 ohm RCA video cable for as an analog audio ...
https://www.audiosciencereview.com/forum/index.php?threads/using-a-75-ohm-rca-video-cable-for-as-an-analog-audio-cable.8349/
Yes for analog audio, you want a coax with a heavy braided shield. Those cables with a thin foil shield are optimized for cable TV frequencies. When dealing with generic cable number like RG-6 & RG-59, you have to be careful as these cables can be optimized for low frequencies or high frequencies with the same RG number.
Using RG6 Satellite/Cable Coax for audio?
https://forums.slimdevices.com/showthread.php?30801-Using-RG6-Satellite-Cable-Coax-for-audio
I've read that one can make RCA Cable out of RG6 cable. I was able to get a box of 500ft (2 coax + 1 ground line) RG6 cable for free, and would like to run audio cable throughout my apartment and hook up some (around 10) RCA speakers around my apartment. Would RG6 cable be the best bet, or could someone recommend a better way to do this? I'm familiar with making …
Now you know Can I Use Rg59 For Audio
Now that you know Can I Use Rg59 For Audio, we suggest that you familiarize yourself with information on similar questions.
