We have collected the most relevant information on Canford Audio Balanced Xlr To Phono. Open the URLs, which are collected below, and you will find all the info you are interested in.
CANFORD BALANCED TO UNBALANCED CONVERTERS
https://www.canford.de/CANFORD-BALANCED-TO-UNBALANCED-CONVERTERS
XLRM to RCA (phono) male. CANFORD BALANCED TO UNBALANCED CONVERTER PHFXFH Inline, line level. XLRF to RCA (phono) female. CANFORD BALANCED TO UNBALANCED CONVERTER PHFXMH Inline, line level. XLRM to RCA (phono) female. CANFORD BALANCED TO UNBALANCED CONVERTER MJPXFH Inline, line level. XLRF to 3.5mm jack plug.
CANFORD BALANCED TO UNBALANCED CONVERTER PHMXFH …
https://www.canford.co.uk/Products/49-274_CANFORD-BALANCED-TO-UNBALANCED-CONVERTER-PHMXFH-Inline-line-level.-XLRF-to-RCAphono-male
RDL FP-UBC6 CONVERTER Audio, unbalanced to …
https://www.canford.co.uk/Products/58-538_RDL-FP-UBC6-CONVERTER-Audio-unbalanced-to-balanced-RCA-phono-in-XLR-out-6-channel
A stereo balanced to unbalanced converter with gold-plated XLR balanced inputs and gold-plated RCA (phono) outputs. Separate level trim controls are provided. Input level -2 to +10dBu for nominal output -10dBV; output impedance: 75 ohm; frequency response: 10-40,000 Hz (+ or - 0.1dB); THD: 0.005%; Noise: <-90dB (below -10dBV). Supply 24V 50mA.
Converting balanced audio to RCA/phono audio - mixer ...
https://sound.stackexchange.com/questions/46107/converting-balanced-audio-to-rca-phono-audio-mixer-needed
I also already had 2 25m balanced XLR cables which I ran the same route. I plugged the audio source in my home office into a Behringer Ultra DI DI20 and connected the 2 balanced XLRs to it. At the other end, in my lounge, I plugged the cable XLR plugs into my …
SONIFEX CM-LUX1 PRO-INTERFACE Passive, balanced …
https://www.canford.co.uk/Products/95-5887_SONIFEX-CM-LUX1-PRO-INTERFACE-Passive-balanced-XLR-to-unbalanced-RCA-phono
CM-LUR1. This compact unit is a single stereo channel, passive version of the RB-LU4 which allows the conversion of a stereo balanced line input via RJ45 with 'StudioHub+' pin-out to an unbalanced stereo output on RCA phono connectors. The RJ45 connection is located on the rear facing panel of the LUR1. The front facing panel has two RCA phono connectors for left and …
CANFORD BALANCED TO UNBALANCED CONVERTER PHFXMH …
https://www.canford.co.uk/Products/49-277_CANFORD-BALANCED-TO-UNBALANCED-CONVERTER-PHFXMH-Inline-line-level.-XLRM-to-RCAphono-female
XLRF to RCA (phono) female. CANFORD BALANCED TO UNBALANCED CONVERTER PHFXMH Inline, line level. ...
SONIFEX AVN-DIO09 AUDIO INTERFACE Dante, PoE ... - canford.de
https://www.canford.de/Products/95-5949_SONIFEX-AVN-DIO09-AUDIO-INTERFACE-Dante-PoE-powered-balanced-XLR-microphone-to-Dante
Neutrik lockable XLR connectors are used on the interfaces with 3-pin XLR I/O. The DIO09 microphone input to Dante interface has a balanced 3-pin locking XLR socket along with rotary controller to adjust the microphone gain from 0dB to 36dB. A toggle switch allows the user to switch the gain between +20dB/+50dB, while a second and third toggle switch allows for high …
Now you know Canford Audio Balanced Xlr To Phono
Now that you know Canford Audio Balanced Xlr To Phono, we suggest that you familiarize yourself with information on similar questions.