We have collected the most relevant information on Change Audio Output Alsa. Open the URLs, which are collected below, and you will find all the info you are interested in.


How to change the default audio in Wine to Alsa only

    https://askubuntu.com/questions/77210/how-to-change-the-default-audio-in-wine-to-alsa-only#:~:text=Open%20a%20terminal%20and%20run%20regedit.%20Go%20to,2%20steps%20and%20then%20set%20Audio%20to%20pulse.
    none

audio - ALSA: how to temporarily change the output device ...

    https://unix.stackexchange.com/questions/88118/alsa-how-to-temporarily-change-the-output-device
    amixer -c 1 sset Line,0 80%,40% unmute cap will set the second soundcard's left line input volume to 80% and right line input to 40%, unmute it, and select it as a source for capture (recording). amixer -c 1 -- sset Master playback -20dB will set the master volume of the second card to -20dB.

audio - How to change alsa sound output name - Raspberry ...

    https://raspberrypi.stackexchange.com/questions/118598/how-to-change-alsa-sound-output-name
    How to change alsa sound output name. Bookmark this question. Show activity on this post. Alsa volume controller of spotifyd uses 'Master' for output and does not work on a PI. Checking alsamixer I saw that the output is called headphone.

How to change the default audio in Wine to Alsa only

    https://askubuntu.com/questions/77210/how-to-change-the-default-audio-in-wine-to-alsa-only
    Open a terminal and run regedit. Go to HKEY_CURRENT_USER\Software\Wine\Drivers Set Audio to alsa

How to change audio output on the fly? / Multimedia and ...

    https://bbs.archlinux.org/viewtopic.php?id=250518
    pacmd move-sink-input $sink-index alsa_output.usb-Logitech_PRO_X_000000000000-00.analog-stereo #Move to headset, to move to internal card replace that last part with alsa_output.pci-0000_0c_00.4.analog-stereo. You can find the sink index for your actual streams with the aforementioned sink-input command or in a bit more …

Sound configuration on Raspberry Pi with ALSA

    http://blog.scphillips.com/posts/2013/01/sound-configuration-on-raspberry-pi-with-alsa/
    Once you have the sound configuration as you want it you can store it there using the alsactl command which you have to run with root permissions as it changes a protected file. Let’s set the volume to max, unmute it and store it: $ amixer cset numid=3 100 % numid=3,iface=MIXER,name='Master Playback Volume' ; type=INTEGER,access=rw----- …

Updating ALSA Config | USB Audio Cards with a …

    https://learn.adafruit.com/usb-audio-cards-with-a-raspberry-pi/updating-alsa-config
    sudo nano /etc/modprobe.d/alsa-base.conf. For all but the most recent Raspbian Wheezy releases, look for the line that reads: #options snd-usb-audio index=0. Change this to: options snd-usb-audio index=0. Note we removed the # at the start of the line. For the latest Raspbian Wheezy versions, look for this line instead: options snd-usb-audio index=-2

Changing Output Device with PulseAudio - Reality's End

    http://www.realitysend.com/log/linux/changing-output-device-with-pulseaudio
    The ALSA Solution If you're not using PulseAudio, then you are probably using simple ALSA (unless you time-traveled back to OSS days). Fortunately, there is a wealth of information out there on how to setup ALSA and sound-switching properly. Why, all I had to do is: echo 'defaults.pcm.device 3' >> $HOME/.asoundrc service alsa-utils restart

Configuring Linux sound services with ALSA | TechRepublic

    https://www.techrepublic.com/article/configuring-linux-sound-services-with-alsa/
    When ALSA first runs, all audio channels are set to mute by the mixer. This means that you have to adjust the volume level before you hear any sound. Almost all …

Changing audio output from terminal - Unix & Linux Stack ...

    https://unix.stackexchange.com/questions/459240/changing-audio-output-from-terminal
    if grep '^connected$' /sys/class/drm/card0/card0-HDMI*/status ;then sleep 2 pacmd set-card-profile 0 output:hdmi-stereo else sleep 2 pacmd set-card-profile 0 output:analog-stereo+input:analog-stereo fi. To get the active sound profile:

Now you know Change Audio Output Alsa

Now that you know Change Audio Output Alsa, we suggest that you familiarize yourself with information on similar questions.