We have collected the most relevant information on Clockaudio Ts001. Open the URLs, which are collected below, and you will find all the info you are interested in.
Clockaudio > Products > Touch Switches > TS 001
https://clockaudio.com/products/Touch-Switches/ts-001
TS 001 Through Table / Desk / Flush mount electronic capacitive touch switch facilitating click / pop free switching of a Microphone. Discontinued. PLEASE NOTE: When replacing older Clockaudio control devices, please notice the Pin out on the RJ45, as it …
Integrating Polycom SoundStructure with Clockaudio …
https://clockaudio.com/Portals/0/docs/technical-notes/TN_POLYCOM_TS001.pdf
Figure 1. A Clockaudio TS-001 (Clock Audio) The project in this application note will be designed following these steps: 1. The baseline project with 8 microphones, each with a TS-001, will be created. The built-in support for push-to-talk microphones will automatically create the appropriate push button and the red LED behavior.
TS-001 + TS-001W - clockaudio.com
https://clockaudio.com/Portals/0/docs/user-guide/INS_TS001.pdf
www.clockaudio.com For Installation pre -drill 16mm/0.63” hole into table. 87654321 [0.79in] 20m m [0.59in) Ø15rnm . Author: Chris Budgen Created Date:
TS001 Clockaudio Installation Guide - YouTube
https://www.youtube.com/watch?v=lhyN5lbaLCY
The TS001 is a Touch Sensitive Switch Microphone with Bi-Colour LED Halo - Opaque. The TS001 is a flush mount, switch combination which has been designed for...
TS-001 | Through Desk / Flush Mount Electronic Capacitive ...
https://www.av-iq.com/avcat/ctl1642/index.cfm?manufacturer=clockaudio-limited&product=ts-001
The TS-001 is a through desk / Flush mount electronic capacitive touch switch facilitating click / pop free switching of a microphone. Used in conjunction with Clockaudio LB001 and other electronic mute switching boxes to facilitate soft PTT, PTM and Latching switching.
Clockaudio > Products > Touch Switches > LB 001
https://clockaudio.com/Products/Touch-Switches/LB-001
Digital mute switching box allowing pop/noise free muting of a microphone when used with an electronic touch sensor switch. Suitable for use with all Clockaudio control devices: CH32,TS001,SM80S,S80S,CS-S series,CRM-S series Microphone Input / Output via a Phoenix block . Connection to the touch sensor switch is via a RJ45 socket.
FAQ - Clockaudio
https://clockaudio.com/FAQ
Ultimately, the power supply for control devices, such as CH32, S80S, SM80S, TS001 or any Clockaudio microphone equipped with the TS002 touch switch, should be installed in close proximity of the touch switches, under the table. Longer cable runs would require too heavy of a gauge of wire for powering the devices from farther away.
Connecting Clockaudio microphones and mounts to an …
https://support.biamp.com/Tesira/Control/Connecting_Clockaudio_microphones_and_mounts_to_an_EX-LOGIC
The diagrams below shows how to wire a Clockaudio device (with red and green LED's) to an EX-LOGIC using a 12V DC power supply. The EX-LOGIC should be configured using the Logic Output block (not the LED Driver): Click the diagram for a full-size view. This diagram applies to the following microphone models: CH32 / CH32W; TS001 / TS001W
Connecting Clockaudio microphones and mounts to a …
https://support.biamp.com/Audia-Nexia/Control/Logic_Box-VCB/Connecting_Clockaudio_microphones_and_mounts_to_a_Logic_Box
Clockaudio devices require a 12V power supply. The diagrams below shows how to wire a Clockaudio device (with red and green LED's) to a Logic Box using a 12V DC power supply: Click the diagram for a full-size view. This diagram applies to the following microphone models: CH32 / CH32W; TS001 / TS001W; SM80S-PTT / SM80SN-PTT; SM80S-Latch / SM80SN ...
Now you know Clockaudio Ts001
Now that you know Clockaudio Ts001, we suggest that you familiarize yourself with information on similar questions.
