We have collected the most relevant information on Cobranet Audio Devices. Open the URLs, which are collected below, and you will find all the info you are interested in.
CobraNet - HARMAN Pro
https://audioarchitect.harmanpro.com/aa_help/Workflow/CobraNet.htm
As standard, devices within the Soundweb London system are capable of transmitting and receiving a maximum of 32 channels of CobraNet audio onto and from the network. This channel count may be reduced if higher sample rates or lower latencies are required - see Table C. Each BLU-80 and BLU-32 Soundweb London device may transmit and receive four CobraNet bundles …
CobraNet - Biamp Cornerstone
https://support.biamp.com/Audia-Nexia/CobraNet
CobraNet is designed for low latency, multi-channel, uncompressed audio transmissions. Many Biamp products are compatible with CobraNet. CobraNet traffic should be physically separated from regular Ethernet communications given that CobraNet uses broadcast transmissions which are resource intensive.
CobraNet Primer | Crown Audio - Professional Power …
https://www.crownaudio.com/cobranet-primer
Audio Specs . All CobraNet devices operate at a fixed sample rate of 48kHz. The audio data may be transmitted at 16, 20 or 24 bit data as desired. For reliable operation, each CobraNet device must implement transmit and receive buffering. This buffering is fixed at 256 samples and results in a minimum audio network latency of 5.333ms.
CobraNet Networking Guide - Peavey Commercial Audio
https://peaveycommercialaudio.com/wp-content/uploads/2018/05/MediaMatrix-CobraNet-Networking-Guide-1.7.2.0.pdf
The size of the beat packet depends on the number of CobraNet devices and audio bundles in use on the network. It can be as small as approx 200 bytes or can be as large as a full frame . The beat packet is always multicast . Identified by 0x00 following the Ethertype field. Typically, any CobraNet device on the network can become the Conductor.
Integrating external CobraNet audio into a Vocia system ...
https://support.biamp.com/Vocia/Control/Integrating_external_CobraNet_audio_into_a_Vocia_system
Vocia CobraNet Inputs can be used to accept background audio into the system and CobraNet outputs can be used to output background audio and paging. Vocia devices only support a CobraNet latency of 5 1/3 msec, 20-Bit depth and a 48 kHz sample rate, so all other CobraNet devices must match these settings.
DOWNLOADS | CobraNet HOME
https://www.cobranet.info/downloads
The CS4961xx CobraNet ®-enabled network audio processor is the first of these DSP devices to be supported by DSP Conductor. CobraNet Firmware. Firmware may be updated though the Ethernet connection from a Windows PC running CobraNet Discovery.
CobraNet FAQ | CobraNet HOME
https://www.cobranet.info/support/faq
CobraNet allows audio interoperability through a standard communications protocol. CobraNet compliant devices are based on a common hardware reference design from Cirrus Logic. Cirrus also supplies the firmware that implements the communications protocol. Audio can be delivered between CobraNet devices from different manufacturers.
CobraNet Inputs and Outputs Overview - Biamp
https://vocia-help.biamp.com/Help_File/System_Design/Using_External_Cobranet_I-O/CobraNet_Inputs.htm
CobraNet (CN) Inputs Vocia supports the transmission and receiving of CobraNet audio from CobraNet enabled devices such as a Biamp Audia Flex CM. Vocia CobraNet Inputs can be used to accept background audio in to the system and CobraNet outputs can be used to output background audio and paging (Pre Vocia signal processing).
Network Audio | BSS Networked Audio Systems
https://bssaudio.com/en/network-audio
COBRANET HARMAN’s support of CobraNet networked audio allows audio to be passed through BSS Soundweb London BLU-800 or BLU-320 processors into …
Now you know Cobranet Audio Devices
Now that you know Cobranet Audio Devices, we suggest that you familiarize yourself with information on similar questions.
