We have collected the most relevant information on Configure Pulseaudio. Open the URLs, which are collected below, and you will find all the info you are interested in.
How To Get Sound (PulseAudio) To Work On WSL2 - Linux Uprisin…
https://www.linuxuprising.com/2021/03/how-to-get-sound-pulseaudio-to-work-on.html#:~:text=How%20to%20get%20sound%20working%20in%20WSL2%201,...%205%20Start%20the%20PulseAudio%20Windows%20service.%20
linux - How to configure PulseAudio to input/output via ...
https://superuser.com/questions/1157370/how-to-configure-pulseaudio-to-input-output-via-alsa
2 Answers. You can edit ~/.config/pulse/default.pa. It's listed under FILES in the "pulseaudio (1)" manual page. If it is present, the global default.pa is not ... Comment out load-module module-udev-detect, which searches for ALSA hardware devices and overrides the device argument you passed to the ...
Configuring Pulse-audio to use a remote server – Rotelok ...
https://rotelok.com/configuring-pulse-audio-to-use-a-remote-server/
Configuring Pulse-audio to use a remote server. Let’s Start with some definitions: Server: The computer that receives the audio and have the speakers connected. Client: The computer that generates the audio and send it via the network. On the server side you’ll need to enable the ‘module-native-protocol-tcp’ pulse-audio module, this module usually is already …
How do I configure sound with PulseAudio and Multiseat ...
https://askubuntu.com/questions/192522/how-do-i-configure-sound-with-pulseaudio-and-multiseat
To run pulseaudio as a system-wide daemon, we need to edit a few files. 1.) /etc/default/pulseaudio. PULSEAUDIO_SYSTEM_START=1 2.) /etc/pulse/daemon.conf - See man pulse-daemon.conf for more information. daemonize = yes local-server-type = system 3.) /etc/pulse/client.conf. autospawn = no We also need to add users to the pulse-access group.
How to configure PulseAudio for playing on multiple ...
https://medium.com/%40joao.paulo.silvasouza/how-to-configure-pulseaudio-for-multiple-devices-at-the-same-time-in-ubuntu-4943ef0c16db
sudo geany /etc/pulse/default.pa. Assuming you use Ubuntu, your default configuration probably has a section like this: ### Load audio drivers statically. ### (it's probably better to not load ...
networking - How to set up PulseAudio remote properly …
https://unix.stackexchange.com/questions/470961/how-to-set-up-pulseaudio-remote-properly-and-securely
Edit /etc/pulse/default.pa and add these lines: load-module module-native-protocol-tcp load-module module-zeroconf-discover. Run these commands: pulseaudio -k pulseaudio --start pacmd list-modules | grep native-protocol-tcp pacmd list-modules | grep zeroconf-discover. PulseAudio started and the modules were correct.
Configuring Pulseaudio for Multiple Output Devices - Eliot ...
http://www.6by9.net/configuring-pulseaudio-for-multiple-output-devices/
To re-configure Pulseaudio for audio out (to my headphones): #!/bin/sh /usr/bin/pacmd set-card-profile alsa_card.pci-0000_02_05.0 output:analog-stereo /usr/bin/pacmd set-sink-port alsa_output.pci-0000_02_05.0.analog-stereo analog-output\;output-headphones-2 echo Full Pulseaudio Configuration Output. lspci -vvv -s 02:05.0
PulseAudio/Examples - ArchWiki - Arch Linux
https://wiki.archlinux.org/title/PulseAudio/Examples
To configure the remote pulseaudio server, add the following to /etc/pulse/default.pa (or to /etc/pulse/system.pa if running pulseaudio in --system mode): load-module module-rtp-recv latency_msec=10 sap_address=0.0.0.0 sap_address=0.0.0.0 is important to prevent pulseaudio from trying to use multicast, which doesn't work at all over wifi.
configuration - I want to change the pulseaudio config ...
https://askubuntu.com/questions/225292/i-want-to-change-the-pulseaudio-config-file
Any other method is discouraged as it may seriously break your audio system. In short you will have to edit the following line in your /etc/pulse/client.conf to: autospawn = no. You need to edit this file as root. Changes will take effect after restarting the pulseaudio server with the following command: pulseaudio -k.
How to Use PulseAudio to Manage Sounds on Ubuntu 18.04
https://linuxhint.com/pulse_audio_sounds_ubuntu/
PulseAudio has a graphical frontend PulseAudio Volume Control, which you can use to easily configure PulseAudio sounds graphically. It is available in the official package repository of Ubuntu 18.04 LTS, but not installed by default. Run the following command to install PulseAudio Volume Control on Ubuntu 18.04 LTS: $
Now you know Configure Pulseaudio
Now that you know Configure Pulseaudio, we suggest that you familiarize yourself with information on similar questions.
