We have collected the most relevant information on Decklink Audio Problem. Open the URLs, which are collected below, and you will find all the info you are interested in.
Blackmagic Forum • View topic - Decklink Studio 4K Audio ...
https://forum.blackmagicdesign.com/viewtopic.php?f=18&t=70345
Decklink Studio 4K Audio problems. Back in September of 2017, I ordered a Decklink Studio 4K (PCI) and for various reasons never got around to really using it until recently. I hope the card doesn't have an issue and require a swap but that might be necessary. When capturing audio over HDMI along with video, it (eventually) will have audio ...
Decklink Output Audio Drift | OBS Forums
https://obsproject.com/forum/threads/decklink-output-audio-drift.141419/
Audio was out of sync (known problem, reported at NDI plugin github). Other NDI sources (like Vmix) does not have that issue. Now we tried the Decklink mini monitor PCI card, directly connected at the Atem switcher. That gives the same issue as described above. After a fresh start of OBS, audio is in sync with video, but after a while it is ...
[SOLVED] Decklink Duo 2 / Sonnet / Thunderbolt - Audio Problem
https://forums.vmix.com/posts/t20553--SOLVED--Decklink-Duo-2---Sonnet---Thunderbolt---Audio-Problem
When using the Decklink Duo as the external output via SDI, audio and video run asynchronous, and the audio gets distorted after a few minutes of playback. The card seems to be working fine when all SDI inputs are connected with a valid signal, and activated in VMix. When we don't use all connector of the Card the Problem occurs.
Audio problem | OBS Forums
https://obsproject.com/forum/threads/audio-problem.132210/
When I add the decklink as a source in OBS, the audio coming from it sounds very choppy and unusable. When using this capture card in any other program, audio is clear. I was able to set the decklink audio to Mic/Aux Audio under Settings -> Audio and everything cleared up. Just mute the original audio source.
How To Configure Blackmagic Capture Cards - Userful …
https://support.userful.com/Docs/HowTos/Configure_Blackmagic_DeckLink_Capture_Cards
From the drop-down menu select Blackmagic DeckLink Capture as the source type and give a name. Select the Input device from the drop-down menu. Select the Mode from the drop-down list (output resolution and frames per second). Select the connection type from the drop-down menu. Select a scaling option. Enable sound only if it is required.
Now you know Decklink Audio Problem
Now that you know Decklink Audio Problem, we suggest that you familiarize yourself with information on similar questions.
