We have collected the most relevant information on Digidesign 888 Pro Tools Mix I/O Audio Interface. Open the URLs, which are collected below, and you will find all the info you are interested in.
Digidesign 888 I/O Audio Interface - Sweetwater
https://www.sweetwater.com/store/detail/888IO24--digidesign-888-i-o-audio-interface
The multichannel 888|24 I/O is a stand alone digital interface, offering uncompromising 24-bit recording, editing, signal processing and mixing when used with a Pro Tools|24 system. The 8 analog inputs and outputs come equipped with 24-bit converters - this is a real powerhouse AD/DA converter!
Audio/MIDI Interfaces - Digidesign 888 24
https://thea.com/AudioMIDI-Interfaces-Digidesign-888-24/
Digidesign 888/24 The 888/24 I/O is an 8-channel digital audio interface that features 24-bit analog-to digital. And 24-bit digital-to-analog converters for superior dynamic range, reduced noise floor, and the capability to work with the full 24-bit mixing, editing, processing, and mastering environment of Pro Tools.
Audio/MIDI Interfaces - Digidesign 888
https://thea.com/AudioMIDI-Interfaces-Digidesign-888/
Digidesign 888/24 Audio Interface for Pro Tools TDM Analog and Digital I/O. This 888/24 is one of several just removed from a working Pro Tools TDM system. It includes the Digilink cable and a power cord. This 888 is in perfect working condition and is very clean cosmetically.
888 Audio Interface - Digidesign Support Archives
http://archive.digidesign.com/support/propix/888io.html
888 Audio Interface. Dealer Order Code. MH061 (-PCI or -Nubus determines correct cable type) Supported Sample Rates. 44.1 and 48 kHz. A/D . 1-bit Delta-Sigma;128x Oversampling 16-bit output (18-bit output with PCI cards) D/A. 18-bit; 64x Oversampling. S/N-104dB (A-Weighted) THD.004%, 0 dbFS @ 1kHz, 22 Hz - 22 kHz bandwidth. Frequency Response. 20Hz to 20kHz, ± …
Adding another 888/24 to mix plus system - Avid Pro Audio ...
http://duc.avid.com/showthread.php?t=196649
I have both interfaces hooked using the Y cable into the mix farm. Note: the system runs rock solid with (1) 888 24/io connected but when I connect the other interface via Y cable both interfaces go into stand alone mode and Pro Tools will not start. Operating system: Mac OS 9.2.2 Memory: 768 Serial# XB2401TAMMA MAC OS ROM 9.5.1 Disk Cache 512k
AVID 888 I/O stand alone mode - Avid Community
https://community.avid.com/forums/t/68841.aspx
Just to clarify the Avid 888 interface is audio only virtually identical to a Protools 888 audio interface. The Protools 888 can operate as a stand alone audio D/A or A/D. Even unsrewing the top and looking at the PCB the Avid 888 and Protool 888 share the same main board and but the protools unit has an additional front panel meters board.
Now you know Digidesign 888 Pro Tools Mix I/O Audio Interface
Now that you know Digidesign 888 Pro Tools Mix I/O Audio Interface, we suggest that you familiarize yourself with information on similar questions.
