We have collected the most relevant information on Diyaudio Elliott. Open the URLs, which are collected below, and you will find all the info you are interested in.
Elliott Sound Project 101 Rev C | diyAudio
https://www.diyaudio.com/community/threads/elliott-sound-project-101-rev-c.379646/
This is the P101 rev C. MOSFET Amp from Elliott Sound. I put it together with all his recommended parts. I ordered the power MOSFET from England, 40-0-40 625va Toroidal from Parts Express, Heatsinks from HeatsinkUSA, purchased the Soft-start and speaker protect boards from DIYaudio. I had a Velleman K4305 VU-Meter kit.
Elliott Sound Project 101 Rev C | Page 3 | diyAudio
https://www.diyaudio.com/community/threads/elliott-sound-project-101-rev-c.379646/page-3
Yes, reading the build guide, Elliott does say to use a 5uH to 10uH and a 2.2 to 10 ohm RL. He wrote "The inductor can be quite small (around 5-10μH is about right), and must be shunted by a parallel resistance of between 2.2 and 10 ohms (10μH gives a -3dB frequency of 71kHz with an 8 ohm load)." So I will install a 5uH/2.2ohm RL for this
Elliott Sound Project 97 | diyAudio
https://www.diyaudio.com/community/threads/elliott-sound-project-97.375812/
I finally finished Project 97 Hi-Fi Tone-Control Preamplifier. I ordered the board and it arrived within a couple weeks. I wanted to incorporate a USB/SDcard music player and a SPDIF OR TOSLINK input with a couple Aux inputs. The PreAmp needs +/-15 vdc, the Music player needs 12 vdc and the...
Elliott Sound Project 101 Rev C | Page 2 | diyAudio
https://www.diyaudio.com/community/threads/elliott-sound-project-101-rev-c.379646/page-2
MPSA 42 I know the power transistors are best matched, however, does the MSPA 42 pair need to be matched? Actually, do I really have to match ANY of them??? At 66 years, my hearing is NOT up to audiophile standards. Thanks some much for the help. ESP Form is a dead end, a least for me.
DIY Audio Projects Forum • Elliott Sound Products Discrete ...
https://diyaudioprojects.com/Forum/viewtopic.php?t=2658
I was given the task, by my friend in Singapore, to make-up the cct. brd. only for a Elliott discrete transistor preamp P37A. I was given a strict budget and told to use vera-board (holed copper strips). All I was given was the schematic. Here is the near complete brd. Only filter and storage caps to add.
DIY Audio Projects Forum • Elliott Sound Products Discrete ...
https://diyaudioprojects.com/Forum/viewtopic.php?t=2658&start=10
Post subject: Re: Elliott Sound Products Discrete SS Minimalist Hi-Fi Preamp. Posted: 28 Sep 2010 6:53 pm . Joined: 28 Oct 2009 8:34 am Posts: 501 Location: Utrecht Nederland Hi everybody, nice job Mark, but why not build a whisper quiet PSU? I am able to do that for my RIAA pre amps, too, mine are regular triode stages, so no noise rejection ...
Elliott Sound Discrete transistor preamp P37A - DIY Audio ...
https://diyaudioprojects.com/Gallery/displayimage.php?album=4&pid=622
Elliott Sound Discrete transistor preamp P37A I made this for a very loyal customer with nothing but a schematic and vero-board. Worked first time. Low current draw (~3mA @ +/- 16V). The sound is very clean and flat. This preamp will definitely please the purist solid state amp lovers.
Elliott Sound Products - The Audio Pages (Main Index)
https://www.sound-au.com/
Elliott Sound Products: Professional results for the Do-It-Yourself enthusiast: Average >1,700 Visitors Per Day Since Jan 2001 : Top. Pages Last Updated January 2022 . Welcome to ESP, the home of DIY audio and electronics articles, and PCBs for popular projects. Electronics is a wonderful hobby, and with DIY there is a huge scope to get the ...
DIY and Hi-Fi Audio Schematics - DIY AUDIO PROJECTS
https://diyaudioprojects.com/Schematics/
DIY Audio Schematics Tube Linestage Preamplifiers. 4S Universal Preamplifier for 12A*7 Tubes - (Project) NEW ; 12AU7 / ECC82 / ECC802S Tube SRPP Preamp Schematic - (Project); 12AX7 Tube Hi-Fi Preamplifier Schematic - (Project); 12AU7 / ECC82 Cathode Follower Tube Preamplifier Schematic
DIY Audio Projects Forum • Elliot Sound Products - P3A ...
https://diyaudioprojects.com/Forum/viewtopic.php?t=2680&start=120
According to Elliott, one PSU rail can be used for a pair of amps. Furthermore, the filtering. Way more than announced (4x 22000µF instead of "max" 15000µF total recommended). I know, the more the better, but is it worth it ? Next question is about preamplification. I plan to use CD player and auxiliary sources like iPod, iPhone, Sonos ...
Now you know Diyaudio Elliott
Now that you know Diyaudio Elliott, we suggest that you familiarize yourself with information on similar questions.
