We have collected the most relevant information on Diyaudio Troels. Open the URLs, which are collected below, and you will find all the info you are interested in.
To Troels or not to Troels? | diyAudio
https://www.diyaudio.com/community/threads/to-troels-or-not-to-troels.380779/
Troels kits are good speakers, but too complex and expensive (as he uses fancy Jantzen parts in his crossovers, that are often to complex) but they do sound very good and are very balanced. On resale value no diy will sell for big money i think. So if that is important, buy the proac. But on sound the troels is great, just too expensive i think.
Troels Gravesen high efficiency 3-way looks ... - diyAudio
https://www.diyaudio.com/forums/multi-way/348582-troels-gravesen-efficiency-3-looks-winner.html
Troels Gravesen recently published a speaker design on his website that looks like it could be perfect for those with low-wattage tube and Class A transistor amplifiers. The speaker is a 3-way unit built with a ScanSpeak tweeter and Faital pro PA woofer and midrange. The crossover is a simple LR2 design at 500Hz and 2400Hz, and the cabinet is a ...
Building Troels Gravesen's 3-Way Classic speakers
http://soundmovements.co.uk/diyaudio/Troels_Classic3Way.html
A DIYAudio discussion on Troels's "house sound". this degenerates for a while into a slanging match around the qualities of NAD amplification, but in the end gets back on track. Another DIYAudio thread on three-way designs in general. One contributor describes Troels's ScanSpeak 3-Way Classic as "near perfection".
The-Loudspeaker-2 - Troels Gravesen
http://www.troelsgravesen.dk/The-Loudspeaker-2.htm
Simpler cabinet for Hypex and passive crossover. Extra internal bracing of bass cabinet section - and more on mid-cab if wanted - and also a small cab for the horn if wanted. The two latter measures are optional. New crossover for 10" midrange driver and minor change to the horn's high-pass filter.
Ellipticor-1 - Troels Gravesen
http://www.troelsgravesen.dk/Ellipticor-1.htm
CABINET BACK TO INDEX. Cabinets made from 25 mm black HDF throughout. Epoxy glue was used (WEST SYSTEM 104).The cabinet dimensions make a net volume of 15.8 litre, minus port, crossover and drivers, plus added volume generated by damping materials. With a Fb = 45 Hz we need a port of Ø50 x 100 mm length.
DIY Speakers and Subwoofer Projects and Kits - …
https://diyaudioprojects.com/Speakers/speakers.htm
DIY Speakers and Subwoofer Projects. Do-It-Yourself (DIY) Speaker and Subwoofer Projects and kits. For those who are new to Loudspeaker and Subwoofer building, take a look at our recommended Hi-Fi Audio Drivers.Near the bottom of this page are the older speaker projects that use drivers which are dnow iscontinued.
Now you know Diyaudio Troels
Now that you know Diyaudio Troels, we suggest that you familiarize yourself with information on similar questions.
