We have collected the most relevant information on Drawmer 1968 Vs Tk Audio. Open the URLs, which are collected below, and you will find all the info you are interested in.
Drawmer 1978 vs TK Audio BC1-THD - Gearspace.com
https://gearspace.com/board/so-much-gear-so-little-time/1370937-drawmer-1978-vs-tk-audio-bc1-thd.html
On the other hand, i'm dead set on getting the Drawmer 1976 saturation so thinking that could be a great partner for the TK-Audio. The colour of the 1976 with the compressor versatility of the TK. BUT the Drawmer 1978 is a good 300-400 less than the TK. As you can see I'm going round in circles a bit
Drawmer 1968 - Stereo Compressor - The Audio Hunt
https://www.theaudiohunt.com/c/dynamics/drawmer-1968-stereo-compressor
The original Drawmer 1960 used a tube stage at the front of the compressor, whilst the 1968 MkII utilisies a J-FET (Field Effect Transistor) gain reduction circuit that operates faster than an opto-isolator. The compressor uses a 12AX7 tube makeup gain amplifier where you can add, with the Output Gain control, up to 20 dB of additional gain.
Drawmer 1968 Mercenary Edition - Sound on Sound
https://www.soundonsound.com/reviews/drawmer-1968-mercenary-edition
The compressor section of Drawmer's popular 1960 is held in high regard within the pro audio industry, and the new 1968 appears to be based on a variation of the same JFET gain-reduction circuit combined with a. valve. tube gain stage. Housed in a 1U rack, the 1968 is a dual-channel 'buss' compressor, which is to say that it is designed to operate at line level within master, …
Drawmer Electronics - 1968
https://www.drawmer.com/products/60s-series/1968-dual-channel-tube-compressor.php
1968 MkII - Dual Channel Tube Compressor. Blend valves and FETs for quality compression. The 1968 MkII is a 1U Tube/FET ‘stereo bus’ compressor which by design delivers a transparent ‘open’ sound even during periods of heavy compression.. The original Drawmer 1960 used a tube stage at the front of the compressor, whilst the 1968 MkII utilisies a J-FET (Field Effect Transistor) …
Drawmer: 1968 Mercenary Edition | Tape Op Magazine ...
https://tapeop.com/reviews/gear/44/1968-mercenary-edition/
Drawmer. : 1968 Mercenary Edition. The Drawmer 1968 Mercenary Edition is a 1RU version of Drawmer's popular 1969 compressor, without the mic pres. For me, the unit defines punch. It can also provide smooth leveling for the stereo buss, but I'd much rather use it for its aggressive qualities. In general, there are two reasons to use a compressor. One is for its gain reduction …
Field Test: Drawmer 1968 Mercenary Edition Compressor
https://www.mixonline.com/technology/field-test-drawmer-1968-mercenary-edition-compressor-370197
The Drawmer 1968 is a single-rackspace unit that uses the same compression circuitry as the 1969: a FET-based gain-reduction element with a tube output stage. Each channel has threshold, attack and release knobs, as well as a Big switch and an output (gain makeup) control. The Big switch puts a highpass filter into the compressor circuit’s ...
Drawmer 1968 ME Mercenary Edition Stereo Compressor …
https://reverb.com/p/drawmer-1968-me-mercenary-edition-stereo-compressor
Overview. The Drawmer 1968 ME is a Mercenary Edition stereo compressor designed specifically for the main stereo mix buss. Designed and tested in conjunction with the staff at Mercenary Audio, the 1968 took the compression circuit from the 1969 model preamp / compressor and omitted the mic preamps while putting the "Big" switch on each channel rather than on a third …
Now you know Drawmer 1968 Vs Tk Audio
Now that you know Drawmer 1968 Vs Tk Audio, we suggest that you familiarize yourself with information on similar questions.
