We have collected the most relevant information on Dscaler Audio Input. Open the URLs, which are collected below, and you will find all the info you are interested in.
DScaler - Installation & Setup
http://dscaler.net/setup/index.htm
4. Select required input from Settings/Video Input. 5. Select video format standard from Settings/Video Format menu. 6. Select audio input from Settings/Audio Input (if applicable for your setup). 7. Select MSP/Radio Options (If your card has a sound chip onboard) 8. Choose Channel Scan (if you are using the internal tuner of your capture card) 9.
DScaler :: View topic - no audio with dscaler 4.1.12 and ...
http://deinterlace.sourceforge.net/phpBB/viewtopic.php?t=4413&highlight=
If Dscaler is started on my PVR500 (two tuners, same as PVR 150) then I get video but no audio (using the latest drivers). If I then start another TV application like ChrisTV and then Dscaler again, sound is there in Dscaler. However, sometimes Dscaler will then mute the Windows mixer wave input to 0 which results in no audio again.
Line in doesn't work OR Dscaler has no sound - Ars ...
https://arstechnica.com/civis/viewtopic.php?t=665782
Select the line-in as your record source (you'll do this in the Windows control panel) and have DScaler's audio input set to "Tuner". H@
DScaler :: View topic - low volume cx2388x
http://www.dscaler.net/phpBB/viewtopic.php?p=26990
The input to the audio DACs is based on two bits present in the AUD_CTL register: DAC_ENABLE and I2S_STR2DAC. If DAC_ENABLE is disabled, then no signals or enables are passed to the DAC.
DScaler and Sound Problems | AVS Forum
https://www.avsforum.com/threads/dscaler-and-sound-problems.87972/
Settings -> Audio Input = Tuner Hardware -> MSP/Radio -> TV Terrestrial FM-mono + FM-stereo Hardware -> MSP/Radio -> Major Carrier = PAL I Hardware -> MSP/Radio -> Minor Carrier = PAL B/G Nicam Stereo Hardware -> MSP/Radio -> Mono with no Auto Stereo adjustment
DScaler Deinterlacer/Scaler / List deinterlace-discuss ...
https://sourceforge.net/p/deinterlace/mailman/deinterlace-discuss/?viewmonth=200208
It was not visible or=20 > adjustable in DScaler, but the value was '0' (wave channel).=20 > I added this one to the dialog box. The mixer channels are=20 > now more directly linked to the video inputs. Mixer inputs=20 > that are not used are disabled. The right mixer input is now=20 > muted and used for volume changes. Even better :) John
DScaler :: View topic - Supported SAA7134 and SAA7130 ...
http://deinterlace.sourceforge.net/phpBB/viewtopic.php?p=15216&highlight=
DScaler has two ways of muting audio: 1. Use the SAA7134 chip's hardware mute. 2. Use Windows' mixer to mute the line on which the loop-back cable is attached. Before and after changing channels, DScaler mutes and unmutes audio as per the anti-plop setting using BOTH methods 1 and 2.
DScaler Deinterlacer/Scaler / List deinterlace-checkins ...
https://sourceforge.net/p/deinterlace/mailman/deinterlace-checkins/?viewmonth=200201
- - When video format or audio input is changed (to tuner or radio) the detection process is restarted. ! Model D: Automatic Standard Detection (TV sound standard is detected automatically) FM matrix must be programmed manually. ! ... MSP34x0.h MSP34x0.cpp DScaler.h BT848Source_Audio.cpp BT848Card_Audio.cpp Bt848_Defines.h Log Message: Revision ...
DScaler - SDA Knowledge Base - Speed Demos Archive
https://kb.speeddemosarchive.com/DScaler
Audio input should be either Tuner for TV or Stereo for console output; you should check pin 1 if it's there. Similarly, go to Settings/Audio Mixer setup and disable the hardware mute. Then go into Settings/Advanced Settings and click on the first row, for your card chipset.
Dscaler 5 audio codec - Zoom Player - Support ...
https://forum.inmatrix.com/index.php?showtopic=2094
Dscaler 5 audio codec - posted in Zoom Player - Support & Development: I am having problems getting the Dscaler 5 audio codec to pass DTS audio while using Zoom Player Pro v4.10b2. The Dscaler 5 audio codec works fine for me in Media Player Classic passing DTS, so I am confused as to why it is not working in Zoom Player. I have tried both Saving Private …
Now you know Dscaler Audio Input
Now that you know Dscaler Audio Input, we suggest that you familiarize yourself with information on similar questions.
