We have collected the most relevant information on Er Audio Esl-3 Loudspeaker. Open the URLs, which are collected below, and you will find all the info you are interested in.


Electrostatic Loudspeakers By ER Audio

    http://www.eraudio.com.au/
    Electrostatic Loudspeakers By ER Audio. We have now released the replacement for the elderly but respected ESL III and ESL IIIb speakers. The new speaker is called the ESL IV. (I know, quite unimaginative!) Go HERE to see more details and a review by one of the first users. To go directly to Geoff’s review go HERE.

DIY Loudspeaker - ER Audio

    http://www.eraudio.com.au/DIY_Speaker_Kits/ESL_III_Kit/esl_iii_kit.html
    ESL III Electrostatic Loudspeaker Kit Panel Dimensions 1225 x 550 x 25 Active area 0.55 m2 Frequency Response 35 Hz – 200 Hz + or – 6dB (this depends on the enclosure) 200Hz – 20 kHz + or – 2 dB Note, This kit is discontinued - Click HERE to visit the ESL IV Page Sensitivity 86 dB @ 2.83 volts (typically)

ER Audio ESL speaker kit | diyaudiokits - Wix.com

    https://robmid42.wixsite.com/diyaudiokits/er-audio-esl-speaker-kit
    BUILDING MY HYBRID ER AUDIO 505 ESL PANEL SYSTEM (UPDATED April 2020). The fuss free way. DISCLAIMER: I had never heard an ESL before I built Rob's kit but I had heard Apogee Ribbons (I thought they were ESL's) and was amazed at the lack of colouration and realism. After reading a post on StereoNet forum about Rob's 505's decided to take the plunge despite being …

Electrostatic Loudspeakers by E R Audio Review By Steve ...

    http://eraudio.com.au/Reviews/Steve_West_Oz/steve_west_oz.html
    *ER Audio ESL-3: I've kept the best for last, this absolutely fabulous electrostatic loudspeaker is made by Rob Mackinlay, in Perth - Western Australia. Mackinlay is a mechanical engineer from England (working in the mining industry) who has for many years been fascinated by the electrostatic principle, and has subsequently built his own ...

ESL IV Kit - ER Audio

    http://eraudio.com.au/DIY_Speaker_Kits/ESL_IV_Kit/esl_iv_kit.html
    ESL IV Kit. The replacement speaker for our elderly but respected ESL III, the ESL IV, has now been released. The Description and design philosphy are below. ESL IV Electrostatic Loudspeaker Description. The ESL IV electrostatic loudspeaker is made up of 2 panels, approx. 600 x 450 x 14 mm (H x W x D), per loudspeaker, stacked vertically giving ...

Jason's DIY Audio: DIY Electrostatic Loudspeakers / ESLs ...

    https://jasondiyaudio.blogspot.com/2007/12/diy-electrostatic-loudspeakers-esls.html
    For my budget and my listening environment, I chose one of ER Audio's kits that bore the designation ESL III. The completed speaker is adequate for a room up to 6m x 4m. It will go down to 35-38Hz @ -5/-6db. Larger rooms would require additional reinforcements. The price of the ESL III kit by my standards, are not cheap.

Now you know Er Audio Esl-3 Loudspeaker

Now that you know Er Audio Esl-3 Loudspeaker, we suggest that you familiarize yourself with information on similar questions.