We have collected the most relevant information on Error Problems Opening Audio Device Pulse. Open the URLs, which are collected below, and you will find all the info you are interested in.
[SOLVED] Pulseaudio + MPD: ERROR: problems opening audio ...
https://bbs.archlinux.org/viewtopic.php?id=160100
Re: [SOLVED] Pulseaudio + MPD: ERROR: problems opening audio device I found a solution to this. The problem was running pulseaudio …
How to Fix pulseaudio issues in Linux - Appuals.com
https://appuals.com/how-to-fix-pulseaudio-issues-in-linux/
Try plugging any USB device into a USB port and then restart the puleaudio daemon. You might also try plugging and unplugging something into the headphone jack. Apparently, this inadvertently sends a signal that the open …
PulseAudio doesn't work. · Issue #486 · microsoft/WSL · …
https://github.com/Microsoft/WSL/issues/486
For example, OSS sound (for which pulse has a sink) uses unix ports, so Pulse's OSS sink module will trick all OSS applications into piping their output to a unix socket opened by Pulse. Similarly, you can have a pulse module for Alsa, etc. In addition to those sink modules, pulse has a "pulse sink" for pulse-aware programs.
Fixing Raspberry Pi Audio Issues – VuePilot
https://www.vuepilot.com/support/article/fixing-raspberry-pi-audio-issues/
Open the file /etc/pulse/default.pa for editing (must be admin, from the terminal run sudo nano /etc/pulse/default.pa) Around line 45, find the section that reads. then simply append append tsched=0 to the bottom line. So it looks like. Save and reboot your Raspberry Pi, audio should now be working fine and at a high quality.
Pulse Audio -- Conneciton rejected
https://forums.opensuse.org/showthread.php/417465-Pulse-Audio-Conneciton-rejected
Pulse Audio -- Conneciton rejected. forthat@headroom:~> pulseaudio W: main.c: High-priority scheduling enabled in configuration but not allowed by policy. W: core-util.c: setpriority (): Permission denied W: ltdl-bind-now.c: Failed to find original dlopen loader.
audio - PulseAudio server connection failure: Connection ...
https://unix.stackexchange.com/questions/445386/pulseaudio-server-connection-failure-connection-refused-debian-stretch
On my Xubuntu 18.04 system, I had a problem with pulseaudio not accepting the ~/.config/pulse/cookie file. I tried to reinstall pulseaudio as suggested in the other answer but that didn't help, so I simply removed and re-generated the user configuration as follows: mv ~/.config/pulse ~/.config/pulse.old pulseaudio --start
Pulseaudio cannot detect PCM device - NXP Community
https://community.nxp.com/t5/i-MX-Processors/Pulseaudio-cannot-detect-PCM-device/m-p/425755
I have IMX6Q based board and want game with pulseaudio. My board have 3 sound devices. # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: tlv320aic3xaudi [tlv320aic3x-audio], device 0: HiFi tlv320aic3x-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 …
Music Player Daemon/Troubleshooting - ArchWiki
https://wiki.archlinux.org/title/Music_Player_Daemon/Troubleshooting
output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": No such file or directory or player_thread: problems opening audio device while playing "Song Name.mp3" This is because the MPD users need to be part of the audio group to access sound devices under /dev/snd/. To fix it add user make the MPD user part of the ...
Did I destroy my RPi sound card / audio device? : …
https://www.reddit.com/r/raspberry_pi/comments/4hupwp/did_i_destroy_my_rpi_sound_card_audio_device/
It was working before. The last changes I made is including a RGB LED strip, following the Adafruit Guidelines, just that RPi and LEDs are powered from the same power source (not µUSB). While doing that i also ran: sudo apt-get update sudo apt-get upgrade sudo rpi-update. Now I have two issues: The webradio doesn't work at all.
No sound in wsl2 · Issue #4205 · microsoft/WSL · GitHub
https://github.com/microsoft/WSL/issues/4205
after days of unsuccessful attempts I solved the no sound problem by inserting in the file /etc/pulse/client.conf the following line: default-server = 192.168.1.2. obviously the IPv4 LAN address of your computer not that of the virtual …
Now you know Error Problems Opening Audio Device Pulse
Now that you know Error Problems Opening Audio Device Pulse, we suggest that you familiarize yourself with information on similar questions.
