We have collected the most relevant information on Factory Reset Audiocodes Mediant 800. Open the URLs, which are collected below, and you will find all the info you are interested in.
HOWTO: Setup an AudioCodes Mediant 800 with Zetafax
https://www.equisys.com/Support/technotes/howto-setup-an-audiocodes-mediant-800-with-zetafax#:~:text=From%20your%20AudioCodes%20web%20interface%20select%20the%20Device,by%20our%20technical%20team%2C%20then%20select%20Send%20INI.
Mediant™ 800 Gateway and E-SBC - AudioCodes
https://www.audiocodes.com/media/13726/mediant-800-gateway-e-sbc-quick-guide.pdf
Mediant 800 Rev. B Mediant 800 Rev. C [The number and type of port interfaces depend on your ordered hardware configuration.] 1 POWER (Rev. B) AC PWR (Rev. C) LED indicating AC power status: Green On AC power is received by device. Off No power. DC PWR (Rev. C) LED indicating DC power status: Green On DC power is received by device.
AudioCodes Mediant 800, v6.6 and higher - Zenitel Wiki
https://wiki.zenitel.com/wiki/AudioCodes_Mediant_800,_v6.6_and_higher
Factory Reset by using BootP utility. If the factory reset for some reason seem to fail, and you end up with all LED's lit in the MP11x, then it is no longer possible to contact the MP11x using a known IP address. A possible rescue is to use the AudioCodes' BootP program.
AudioCodes Mediant 800 factory reset - 5 // reset pinhole ...
https://stranoteniente.com/itm/AudioCodes-Mediant-800-GGWM00032-Multi-Service-Business-Router-/383752202018e6-r2971vl3j
From your AudioCodes web interface select the Device Actions button from the top of the page, then select Load Configuration File. From the Configuration file screen select the Browse button. Locate the Zetafax_M800_Settings.ini file provided by our technical team, then select Send INI. Your device will restart.
Will factory resetting an AudioCodes Mediant 800 erase any ...
https://www.reddit.com/r/VOIP/comments/sh2npd/will_factory_resetting_an_audiocodes_mediant_800/
Will factory resetting an AudioCodes Mediant 800 erase any applied licences? I've inherited some Mediant 800 gateways from a previous administrator, but the credentials to login to them aren't documented anywhere so I think I'm going to have to factory reset them with the reset button and then reconfigure them.
6.40A – AudioCodes Mediant 800 MSBG - Genesys
https://testlab.genesys.com/compatibilityfiles/documents/Audiocodes%20Mediant%20800%20MSBG%20v6.4.pdf
• After a factory reset, the Mediant 800’s default configuration has DHCP enabled, and the VOIP & Data IP addresses will be 192.168.0.1 and 192.168.0.2 respectively. The IP Address of the VoIP interface is the address of the Web Interface. • If a configuration change is made that causes errors, the Mediant
AudioCodes
https://www.audiocodes.com/media/13227/mediant-800-gateway-and-e-sbc-users-manual-ver-72.pdf
Now you know Factory Reset Audiocodes Mediant 800
Now that you know Factory Reset Audiocodes Mediant 800, we suggest that you familiarize yourself with information on similar questions.
