We have collected the most relevant information on Flex 3000 Audio Setup. Open the URLs, which are collected below, and you will find all the info you are interested in.
3000 audio setup - FlexRadio
http://forums.flexradio.com/Topic5880-55-1.aspx
SETUP: Audio 1. Turn off all options, e.g. DX, CPDR, VOX, DEXP in the mic window on the front console. 2. Set mic gain to mid scale (35). 3. Open the Mixer menu. 4. Select your mic input. 5. Set TX power to 0 (so you don't actually transmit or you can use a dummy load). 6. Select mic input level display on the TX meter. 7.
Flex 3000 and 5000 Setup - W6OP Amateur Radio
https://w6op.com/articles/flex-3000_5000-setup/
When you install VAC you end up with one virtual audio cable, you need to go in to the VAC console and add a second one. Mine are set as shown in the following image. Before CW Skimmer (Flex 3000) Click to enlarge After CW Skimmer Configuration (Flex …
FLEX-3000 Owner's Manual - FlexRadio
https://edge.flexradio.com/www/uploads/20200818185029/FLEX-3000-Owners-Manual.pdf
rarely if ever change, the FLEX-3000 will continue to (rapidly) evolve, offering future capabilities currently only dreamed of. This operating manual attempts to both guide the user step by step through the setup process (both hardware and software) and to act as a reference once the radio has been set up. Additionally, the
Flex 3000 SDR Audio Settings - YouTube
https://www.youtube.com/watch?v=Ti5PoUK-R-4
TelescopeMan shows the audio settings he uses on the Flex 3000 radio with a Heil PR 781 microphone. The Flex equalizer settings are also shown in the video.
Flex 3000 Audio Output settings - FlexRadio
http://forums.flexradio.com/Topic5133-55-1.aspx
The last one was a FT2000 with the DMU and the w2ihy audio 8 band eq using a PR40 mic.. and the audio recordings that have been played back to me from testing using my flex-3000 are far better with only a pro set plus using the hm5 selection..
Flex 3000 - RX and TX audio distorting / Power SDR ...
https://community.flexradio.com/discussion/6361133/flex-3000-rx-and-tx-audio-distorting-power-sdr-crashing
Dear All, I bought a used Flex 3000 two weeks ago. It was working fine until yesterday when the RX and TX audio started becoming distorted. Initially the problem was intermittent but eventually became permanent and so bad that Power SDR started crashing. Many times I battled to reload it. I reinstalled the factory settings - but no help.
W6CAW Flex Radio Page - Craig Williams
http://www.craigwilliams.com/radio/flex3000/index.html
W6OP Flex 3000/5000 basic and advanced setups. *How to Configure the FLEX-3000/5000 for use with WINMOR. *Above How to saved in MS Word format for easier read. Setting Transmit Audio Gain Distribution in PowerSDR - W1AEX. Another – Power SDR Transmit Audio Settings. One of the great things about Software Defined Radio is the ability to make ...
How to Setup Virtual Audio Cable (VAC) 4.0x with PowerSDR
https://helpdesk.flexradio.com/hc/en-us/articles/206605196-How-to-Setup-Virtual-Audio-Cable-VAC-4-0x-with-PowerSDR
In the "Input" drop down box, select Virtual Cable 1. In the "Output" drop down box, select Virtual Cable 2. In the "Auto Enable" section, select this option if you want VAC to automatically engage when any of the digital modes (DIGIx or DRM) are selected on the PowerSDR console. This is the preferred setting.
TX Audio Setup Procedure by W1AEX, Rob – FlexRadio
https://helpdesk.flexradio.com/hc/en-us/articles/202118248-TX-Audio-Setup-Procedure-by-W1AEX-Rob
Note: For those who are using an external audio rack with their Flex Radio I would also suggest reading through the excellent External Audio Setup Tutorial at the blog written by Craig W1MSG. While setting up his external audio chain Craig resolved an annoying issue with his Flex 5000A that involved tearing on audio peaks.
PowerSDR - KE9NS
https://www.ke9ns.com/flexpage.html
2/19/20 v2.8.0.151 Add: Audio Mixer: You can now Mix PC audio and Flex MIC audio together (Setup->Audio->VAC1->Mix VAC1 and MIC audio checkbox.). Enable VAC1 and make sure to uncheck "Allow PTT to override..." box. Your PC audio output device must be the same as the PowerSDR VAC1 Input device.
Now you know Flex 3000 Audio Setup
Now that you know Flex 3000 Audio Setup, we suggest that you familiarize yourself with information on similar questions.
