We have collected the most relevant information on Freeswitch Mod_Portaudio.So. Open the URLs, which are collected below, and you will find all the info you are interested in.
mod_portaudio - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/mod_portaudio
About. mod_portaudio is used for interfacing with sound card. This scenario is usually used when FreeSWITCH is used for a softphone basis, or as an easy way to get a local connection for development. Interaction with mod_portaudio usually happens at the Freeswitch CLI, including setup, placing calls, answering calls, etc.
Mumble Conference With ALSA - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/Mumble+Conference+With+ALSA
For the FreeSWITCH, you'll need mod_portaudio and mod_conference. Verify that you have these modules by looking in mod/ for their filenames (mod_portaudio.so and mod_conference.so)
FreeSWITCH Softphone - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+Softphone
Configuration . See mod_portaudio for initial setup information.. Originating Calls . This example API will dial the FreeSWITCH conference bridge from portaudio. One advantage of this method vs. using "pa call" is that a dialplan is not necessary.
FS Air - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/FS+Air
About. by Seven Du. FreeSWITCH AIR is an Adobe AIR-based GUI for FreeSWITCH. It makes FreeSWITCH as easy to use as a softphone. The idea is to connect to FreeSWITCH mod_event_socket and control mod_portaudio by using API commands. Also it listens to the events such as portaudio::ringing and CHANNEL_HANGUP to update the GUI accordingly.
freeswitch-format-portaudio-stream-1.10.7-1.el7.x86_64.rpm ...
https://centos.pkgs.org/7/okey-x86_64/freeswitch-format-portaudio-stream-1.10.7-1.el7.x86_64.rpm.html
RPM OpenSuSE 13.X freeswitch-endpoint-portaudio 1.2.23 x86 ...
http://rpm.pbone.net/info_idpl_68508748_distro_opensuse13.x_com_freeswitch-endpoint-portaudio-1.2.23-4.37.x86_64.rpm.html
Provides : freeswitch-endpoint-portaudio freeswitch-endpoint-portaudio(x86-64) mod_portaudio.so()(64bit) Requires :
Connecting to mod_portaudio | FusionPBX Forums
https://www.pbxforums.com/threads/connecting-to-mod_portaudio.5165/
The next part of my project is to be able to dial into FS and connect to a microphone on a Raspberry Pi USB Audio Adapter. I've modified the portaudio.conf.xml file, reloaded the module from the CLI but haven't been to get the mod to recognize the audio adapter. When I reload the mod I get this...
Auto Nat - FreeSWITCH - Confluence
https://freeswitch.org/confluence/display/FREESWITCH/Auto+Nat
For this test I will use portaudio, but you can also register a SIP phone to make a test call - see below. We'll use the public FreeSWITCH conference echo test so that we can verify audio in both directions. If you make a call and can hear your voice echoed back to you then everything is working properly. Here's a sample console session:
Now you know Freeswitch Mod_Portaudio.So
Now that you know Freeswitch Mod_Portaudio.So, we suggest that you familiarize yourself with information on similar questions.
